The 5 laser engravers we'd put on our own bench in 2026Top 5 laser engravers → See the ranking

xTool M2 20W Review

The xTool M2 20W ticks most of the boxes we care about: Class 1 safety under a closed lid and a built-in camera. It is a good match for crafting in a spare room instead of a garage, at 7.1/10 on its documented specs.

Price$829-31%List price $1,199Save $370 vs. list pricePrice on Nov 18, 2026 · may have changed
Compare side by side ↗
Specifications
BrandxTool
CategoryLaser engravers
Laser typeDiode
Laser output (lowest stated)3 W
EnclosureEnclosed or Class 1, as stated in the title
CameraStated in the listing
Safety featuresClass 1
Materials namedWood, leather, metal, paper and card, fabric
ASINB0GSVGZCLF

Full listing title: xTool M2 20W Laser Engraver, Built-in Dual Cameras, Class 1 Enclosed Safe Laser Engraving Machine for DIY Craft on Wood, Leather, Felt, Fabric, Paper

Listing evidence
Laser type Exact Full listing title
Laser output (lowest stated)3W Exact listing
Enclosure Exact Full listing title
Updated October 2026
Exact listing, ASIN B0GSVGZCLF
Rating from a published formula

Compared with similar laser engravers

The two laser engravers closest to it on our rating, with a dated price.

Compare side by side ↗

xTool M2 20W

xTool M2 20W

7.1Good · out of 10$829 -31% List price $1,199Save $370 vs. list price Price on Nov 18, 2026 · may have changed
  • Stated: Diode · 3 W laser
  • Laser engravers
This product ↑
Monport MEGAS 70W CO2

Monport MEGAS 70W CO2

7.1Good · out of 10$2,999.99 Price on Nov 18, 2026 · may have changed
  • Stated: CO2
  • Laser engravers
See the review ↗
ATOMSTACK A20 PRO V2 20W

ATOMSTACK A20 PRO V2 20W

7.0Good · out of 10$389.99 Price on Nov 18, 2026 · may have changed
  • Stated: 20 W laser
  • Laser engravers
See the review ↗

Laser output, per the listing

The title says 20 W. The listing's laser output is 3 W, and that is the number we compare. It comes with a diode source. How deep it goes on your material is for a settings grid to tell.

What it has going for it

What changes at your bench

3 W of laser output, per the listing. An engraver first: happy on wood, leather and coated metal, patient on cuts. The title says 20 W; we compare the 3 W of laser output the listing states, and so should you.

Class 1 enclosure, per the listing. The beam stays under the cover in normal use and the smoke leaves through one port, which is what makes a laser livable in a spare room. That port still needs a window or a filter. Our safety and enclosures guide covers the rest.

Built-in camera. You see the bed on screen and drop the design where the piece actually sits, which saves blanks on odd shapes and second-hand finds.

Spare room or garage?

For a spare room or a study, the Class 1 rating in the listing means the beam stays under the cover in normal use. The camera lets you place designs on screen without leaning over the machine.

On balance it can live in the house, as long as the exhaust reaches a window or a filter.

Great for you if…

  • Kids or pets share the house with the laser
  • You hate wasting blanks on crooked jobs

Skip it if…

  • You plan to cut thick wood: 3 W of stated output means many slow passes
  • You need to mark bare steel: that usually takes a fiber or infrared source
  • You'd rather wait for buyer reviews: none are captured for this listing yet

What xTool promises

The seller states, word for word, in the xTool M2 20W listing:

  • Transform 300+ materials—cardstock, felt, leather, wood, etc.—into masterpieces.
  • Built-in dual cameras, this M2 laser engraving machine offers a real-time preview of your workspace.
  • Comes standard with 20W diode laser.
  • Class 1 safety with real-time monitoring and a fully enclosed design that protects your family.
  • xTool M2 is the Class 1 laser engraver, the laser output power is 20000mW.

These are the seller's own words and figures.

xTool M2 20W, view 3

Work area, power and what's in the box

What the xTool M2 20W listing names:

  • Diode laser
  • 3 W of stated laser output (20 W in the title)
  • Class 1 enclosure
  • Camera

Plan the bench and the exhaust route before the box arrives.

xTool M2 20W, view 4

Price and cost per watt of laser output

$829 -31% List price $1,199Save $370 vs. list price Price on Nov 18, 2026 · may have changed

At the price on Nov 18, 2026, each stated watt of laser output costs about $276. That puts it in the pricier third of the 51 laser engravers we have a price for.

Only a rough yardstick: the work area, the enclosure, the size and what comes in the box count as much.

The button opens the exact listing (ASIN B0GSVGZCLF), where today's price, stock and seller apply.

xTool M2 20W, view 5

A better fit for your projects?

Want to cut thicker stock? The xTool S1 40W Rotary Bundle (9.2/10) states 40 W of laser output.

Want air assist built in? The Twotrees TTS-55 Pro (9.1/10) lists air assist.

Our take

The verdict

Our favourite thing about the xTool M2 20W is Class 1 safety under a closed lid, closely followed by a built-in camera. No buyer reviews yet, so the xTool M2 20W has to win you over on paper. Honestly, the catch: no word on the work area. We'd pick it if kids or pets share the house with the laser; otherwise, put it next to the Monport MEGAS 70W CO2 first.

Living with it

Delivery day

Unpack, check the parts against the manual, then give it a spot near a window or the exhaust before you plug in.

The first project

Run a settings grid on scrap wood before the first real gift. Our settings grid guide has the routine.

Day to day

Lid closed, extraction running, and a quick wipe of the lens every few jobs. Our focus and alignment guide has the rest.

The one thing we'd check first

Before you add the xTool M2 20W to your cart: check the wattage, because the 20 W in the title is not the 3 W of laser output the listing states, and the second number is the one that cuts.

Before you buy

What you will make

Lay your biggest cutting board or sign next to that number; tumblers and glasses need a rotary. Our buying guide has the bench layout.

Smoke and air

The cover keeps the smoke in the box, but it still has to go somewhere, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check.

Eyes and fire

Class 1, per the listing, so the beam stays under the cover in normal use. Keep the lid closed, a fire-safe surface underneath, and someone in the room while it runs.

Software

Check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

How it compares

How the xTool M2 20W stacks up against the closest alternative, the Monport MEGAS 70W CO2.

CriterionxTool M2 20WMonport MEGAS 70W CO2
Our rating7.1/107.1/10
Laser typeDiodeCO2
Laser output3 W statedNot stated
EnclosureClass 1Not stated
CameraYes8 MP

Both score 7.1/10. Compare the listings side by side to choose.

The score in detail

How we rated it

Spec-based rating on a 4.5–8.5 scale: 4.5 + average of the 4 criteria × 0.4. Capped at 8.5 because no customer evidence is included.

Key specifications

7 / 10

Build, warranty & certifications

5 / 10

Listing documentation

7 / 10

Fit & compatibility

7 / 10

This product has no captured buyer-review record yet, so its rating comes from the documented listing alone: four criteria scored out of 10 (key specifications; build, warranty and certifications; listing documentation; fit and compatibility), placed on a 4.5–8.5 scale. Read the full methodology.

Read the methodology →

Frequently asked questions

Is the xTool M2 20W any good?

We rate it 7.1/10 (good). The rating comes from its documented listing alone, as no customer-review record is captured yet.

What laser output and work area does the xTool M2 20W state?

Its listing states a diode source and 3 W as its lowest stated laser wattage. Those are the seller's figures, and a big wattage in a title often describes the power supply or the module rather than the light that reaches your material.

What else do I need with the xTool M2 20W?

Check the exact listing and the manual for what ships in the box: smoke extraction or a filter unit, a work surface such as a honeycomb bed, and the software. Never laser PVC, vinyl or unknown plastics, and never leave the machine running on its own. Our laser buying checklist lists the checks.

What do you get with the xTool M2 20W?

Its listing states a Class 1 enclosed body and a built-in camera. These are the seller's figures; how fine the detail comes out on your material and how loud the fans are in your room can't be read from a listing.

What should I check before ordering the xTool M2 20W?

What you will make: lay your biggest cutting board or sign next to that number; tumblers and glasses need a rotary. Our buying guide has the bench layout. Smoke and air: the cover keeps the smoke in the box, but it still has to go somewhere, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check. Eyes and fire: Class 1, per the listing, so the beam stays under the cover in normal use. Keep the lid closed, a fire-safe surface underneath, and someone in the room while it runs. Software: check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

Where can I buy the xTool M2 20W?

We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.

Keep comparing

If the xTool M2 20W hasn't sold you yet, see where it ranks, read the guides that feature it or browse all laser engravers.

Read this before you buy