The 5 laser engravers we'd put on our own bench in 2026Top 5 laser engravers → See the ranking

Twotrees TTS-55 Pro Review

The Twotrees TTS-55 Pro packs a 300 × 300 mm work area, air assist on board and up to 30,000 mm/min of stated speed into one laser engraver. For a first laser for a garage or a spare room, it's the one to shortlist first: #1 in our laser engraver for beginners ranking.

Variants of this model

Each variant has its own page.

Specifications
BrandTwotrees
CategoryLaser engravers
Laser output (lowest stated)5.5 W
Stated work area300 × 300 mm
Stated speedUp to 30,000 mm/min
Stated precision0.1 mm
Air assistStated in the listing
ConnectivityWi-Fi or app, offline mode
Software namedLightBurn
Cutting claimUp to 5 mm of wood, per the seller
Materials namedWood, leather, acrylic, metal, paper and card
Buyer reviews495 · 4.4/5
ASINB0GJC2CCZB

Full listing title: Twotrees TTS-55 Pro Laser Engraver 5500mW Laser Engraving Machine

Listing evidence
Laser output (lowest stated)5500mW Exact listing
Stated work area300x300mm Exact listing
Updated October 2026
Exact listing, ASIN B0GJC2CCZB
Rating from a published formula

Compared with similar laser engravers

The two picks next to it in our laser engravers for beginners ranking, with their rating and a dated price where we have one.

Compare side by side ↗

Twotrees TTS-55 Pro

Twotrees TTS-55 Pro

9.1Excellent · out of 10$169.99 Price on Nov 18, 2026 · may have changed
  • Stated: 5.5 W laser · 300 × 300 mm
  • 495 buyer reviews
  • Laser engravers
This product ↑
Creality Falcon A1 10W

Creality Falcon A1 10W

6.7Good · out of 10$549 Price on Nov 18, 2026 · may have changed
  • Stated: 10 W laser · 460 × 346 mm
  • 147 buyer reviews
  • Laser engravers
See the review ↗

Laser output, per the listing

The lowest laser wattage the listing states, which is the one we compare. It comes with a 300 × 300 mm work area. How deep it goes on your material is for a settings grid to tell.

Why it made our list

What changes at your bench

5.5 W of laser output, per the listing. An engraver first: happy on wood, leather and coated metal, patient on cuts. We read the lowest laser wattage the listing states, so this is the number to compare.

300 × 300 mm work area. Enough for coasters, tags and small signs; bigger boards need a second setup or a bigger machine. Our buying guide plans the bench around it.

Air assist. A jet of air at the nozzle blows the smoke out of the cut: cleaner edges, less charring and fewer flare-ups on wood.

Spare room or garage?

For a spare room or a study, jobs can go over Wi-Fi or the app from your desk.

For a garage or a workshop, an open frame belongs where smoke and stray light bother nobody.

On balance it is happiest in a garage or a workshop, glasses on and the exhaust going outside.

Great for you if…

  • You want our #1 laser engraver for beginners
  • You want cleaner cuts on wood
  • You trust a long track record: 495 buyer reviews

Skip it if…

  • You need to mark bare steel: that usually takes a fiber or infrared source
  • You want to place designs on screen: the listing names no camera

What Twotrees promises

The seller states, word for word, in the Twotrees TTS-55 Pro listing:

  • The TTS-55 PRO features a powerful 5500 mW (5.5W) laser (Class II) and includes a newly added metal air-assisted nozzle and red laser shield.
  • Cut through 5mm plywood, 3mm acrylic, and 0.7mm leather with precision.Working area 300x300mm.
  • Achieve ultra-fine results with up to 0.1mm engraving accuracy.
  • Software & System Compatibility Fully compatible with LaserGRBL (Windows XP/7/8/10) and LightBurn (Windows, macOS, and Linux).
  • Easy to Install & 24/7 Support Twotrees TTS-50 Pro 5500MW laser engraver comes with all tools needed and detailed guides for installation and use.

These are the seller's own words and figures.

Twotrees TTS-55 Pro, view 3

Work area, power and what's in the box

What the Twotrees TTS-55 Pro listing names:

  • 5.5 W of stated laser output
  • 300 × 300 mm work area
  • Up to 30,000 mm/min, stated
  • Air assist
  • Wi-Fi or app, LightBurn named, offline mode

Plan the bench, the exhaust route and the glasses before the box arrives.

Twotrees TTS-55 Pro, view 4

Price and cost per watt of laser output

$169.99 Price on Nov 18, 2026 · may have changed

At the price on Nov 18, 2026, each stated watt of laser output costs about $31. That puts it around the middle of the 51 laser engravers we have a price for.

Only a rough yardstick: the work area, the enclosure, the size and what comes in the box count as much.

The button opens the exact listing (ASIN B0GJC2CCZB), where today's price, stock and seller apply. Sizes and bundles of the same family often sit at different prices.

Twotrees TTS-55 Pro, view 5

A better fit for your projects?

Need a bigger work area? The xTool S1 40W Rotary Bundle (9.2/10) states 23.93 × 15.16 in.

Want the beam under a cover? The xTool F2 Dual Laser (7.7/10) is enclosed, per its listing.

Our take

The verdict

We like the Twotrees TTS-55 Pro a lot, and not only because it tops our laser engraver for beginners list. 495 buyers back that up with 4.4/5, about as reassuring as a review record gets. The one thing that bugs us: there's no camera in the listing, so you'll line designs up by framing the job first, not by dragging them over a photo of the bed. If your materials and your bench match, this is where we'd put our money. If your numbers don't fit, the LONGER Ray5 20W (400 x 356 mm) is the next one to look at.

Living with it

Delivery day

Unpack, check the parts against the manual, then give it a spot near a window or the exhaust before you plug in.

The first project

Run a settings grid on scrap wood before the first real gift. LightBurn is named in the listing, so the usual grid tools are one menu away. Our settings grid guide has the routine.

Day to day

Air on for cuts, glasses on, extraction running, and a quick wipe of the lens every few jobs. Our focus and alignment guide has the rest.

What buyers say

Buyers give it 4.4/5, a strong record, above this ranking's 4.2 average. And with 495 reviews behind it, that number is hard to argue with.

The numbers
Buyer rating
4.4/5
Reviews
495
This ranking's average
4.2/5

The one thing we'd check first

Before you order the Twotrees TTS-55 Pro: check the work area, because 300 × 300 mm has to fit the biggest piece you plan to make, with room for clamps or a rotary.

Before you buy

What you will make

Cut a piece of cardboard to 300 × 300 mm, put your biggest project on it, and see what sticks out. Our buying guide has the layout.

Smoke and air

An open frame lets the smoke into the room, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check.

Eyes and fire

An open beam needs safety glasses for its exact wavelength, a fire-safe surface and someone in the room. Our safety and enclosures guide explains enclosures.

Software

The listing names LightBurn. Check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

How it compares

How the Twotrees TTS-55 Pro stacks up against the closest alternative in our ranking, the LONGER Ray5 20W (400 x 356 mm).

CriterionTwotrees TTS-55 ProLONGER Ray5 20W, 400 x 356 mm
Our rating9.1/107.0/10
Laser output5.5 W stated20 W stated
Work area300 × 300 mm400 × 356 mm
Buyer reviews495 · 4.4/5176 · 4.0/5

Pick the LONGER Ray5 20W (400 x 356 mm) if more stated laser output (20 W) and a bigger work area (400 × 356 mm) matter more to you; on our rating, the Twotrees TTS-55 Pro comes out ahead.

Frequently asked questions

Is the Twotrees TTS-55 Pro any good?

We rate it 9.1/10 (excellent), #1 of 5 in our laser engraver for beginners ranking. It is based on 495 buyer reviews averaging 4.4/5 and the specifications stated in the listing.

What laser output and work area does the Twotrees TTS-55 Pro state?

Its listing states 5.5 W as its lowest stated laser wattage and a 300 × 300 mm work area. Those are the seller's figures, and a big wattage in a title often describes the power supply or the module rather than the light that reaches your material.

What else do I need with the Twotrees TTS-55 Pro?

Check the exact listing and the manual for what ships in the box: safety glasses for its wavelength, smoke extraction or a filter unit, a work surface such as a honeycomb bed, and the software. Never laser PVC, vinyl or unknown plastics, and never leave the machine running on its own. Our laser buying checklist lists the checks.

What do you get with the Twotrees TTS-55 Pro?

Its listing states a 300 × 300 mm work area, built-in air assist, up to 30,000 mm/min of stated speed and Wi-Fi or app control. These are the seller's figures; how fine the detail comes out on your material and how loud the fans are in your room can't be read from a listing.

What should I check before ordering the Twotrees TTS-55 Pro?

What you will make: cut a piece of cardboard to 300 × 300 mm, put your biggest project on it, and see what sticks out. Our buying guide has the layout. Smoke and air: an open frame lets the smoke into the room, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check. Eyes and fire: an open beam needs safety glasses for its exact wavelength, a fire-safe surface and someone in the room. Our safety and enclosures guide explains enclosures. Software: the listing names LightBurn. Check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

Where can I buy the Twotrees TTS-55 Pro?

We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.

Keep comparing

If the Twotrees TTS-55 Pro hasn't sold you yet, see where it ranks, read the guides that feature it or browse all laser engravers.

Where it ranks

Read this before you buy