The 5 laser engravers we'd put on our own bench in 2026Top 5 laser engravers → See the ranking

xTool S1 40W Rotary Bundle Review

The xTool S1 40W Rotary Bundle ticks most of the boxes we care about: 40 W of stated laser output, a 23.93 × 15.16 in work area and Class 1 safety under a closed lid. For a side business that cuts signs and ornaments, it's the one to shortlist first: #1 in our laser engraver ranking.

Specifications
BrandxTool
CategoryLaser engravers
Laser output (lowest stated)40 W
Stated speedUp to 600 mm/s
Auto-focusStated in the listing
Safety featuresClass 1, flame detection, emergency stop
Cutting claimUp to 18 mm of wood, per the seller
RotaryIncluded, per the title
Materials namedWood, acrylic, metal
Buyer reviews237 · 4.6/5
ASINB0CQ84BDTX

Full listing title: xTool S1 40W Laser Cutter and Laser Engraver for Tumblers, 23.93" x 15.16" Bed Size, 600mm/s Speed, Laser Engraving Machine, Laser Engraver for Wood and Metal, Acrylic, Big Project - Rotary Bundle

Listing evidence
Laser output (lowest stated)40W Exact listing
Updated October 2026
Exact listing, ASIN B0CQ84BDTX
Rating from a published formula

Compared with similar laser engravers

The two picks next to it in our laser engravers ranking, with their rating and a dated price where we have one.

Compare side by side ↗

xTool F2 Dual Laser

xTool F2 Dual Laser

7.7Very good · out of 10$1,091 -36% List price $1,699Save $608 vs. list price Price on Nov 18, 2026 · may have changed
  • Stated: Diode + Infrared · 5 W laser
  • 123 buyer reviews
  • Laser engravers
See the review ↗
LaserPecker LP2 Handheld

LaserPecker LP2 Handheld

7.5Very good · out of 10$599.99 -14% List price $699Save $99.01 vs. list price Price on Nov 18, 2026 · may have changed
  • 124 buyer reviews
  • Laser engravers
See the review ↗

Laser output, per the listing

The lowest laser wattage the listing states, which is the one we compare. It comes with a 23.93 × 15.16 in work area. How deep it goes on your material is for a settings grid to tell.

Why it made our list

What changes at your bench

40 W of laser output, per the listing. Enough to cut wood and acrylic, not only mark them, in fewer passes. We read the lowest laser wattage the listing states, so this is the number to compare.

23.93 × 15.16 in work area. Room for cutting boards, signs and a whole batch of coasters in one go. Our buying guide plans the bench around it.

Class 1 enclosure, per the listing. The beam stays under the cover in normal use and the smoke leaves through one port, which is what makes a laser livable in a spare room. That port still needs a window or a filter. Our safety and enclosures guide covers the rest.

Spare room or garage?

For a spare room or a study, the Class 1 rating in the listing means the beam stays under the cover in normal use.

For a garage or a workshop, 40 W of stated output is cutting power, and cutting makes more smoke than engraving. A 23.93 × 15.16 in work area wants a big, sturdy bench.

On balance it is happiest in a garage or a workshop, lid closed and the exhaust going outside.

Great for you if…

  • You want our #1 laser engraver
  • You want to cut, not only engrave
  • You make signs and cutting boards, not just keychains

Skip it if…

  • You need to mark bare steel: that usually takes a fiber or infrared source
  • You want to place designs on screen: the listing names no camera
  • You plan to cut a lot of wood: the listing names no air assist

What xTool promises

The seller states, word for word, in the xTool S1 40W Rotary Bundle listing:

  • With a powerful 40W (40,000mW) laser, this advanced laser cutter and engraver machine slices through 18mm cherry wood as easily as butter in a single pass.
  • Achieve next-level precision on your precious items with the xTool S1 laser engraver, thanks to xTool’s patented Pin-point Positioning technology.
  • Plus, there are over 1,000 step-by-step project tutorials to guide you.
  • The protective cover filters 99% of laser light, safeguarding your eyes without the need for goggles.

These are the seller's own words and figures.

xTool S1 40W Rotary Bundle, view 3

Work area, power and what's in the box

What the xTool S1 40W Rotary Bundle listing names:

  • 40 W of stated laser output
  • 23.93 × 15.16 in work area
  • Up to 600 mm/s, stated
  • Class 1 enclosure
  • Auto-focus
  • Rotary included
  • Arrives mostly assembled

Plan the bench and the exhaust route before the box arrives.

xTool S1 40W Rotary Bundle, view 4

Price and availability

See current price ↗

We have no recent price on file for this listing, so we don't print an old one.

The button opens the exact listing (ASIN B0CQ84BDTX), where today's price, stock and seller apply.

xTool S1 40W Rotary Bundle, view 5

Our take

The verdict

If a friend asked us for one laser engraver, we'd point them to the xTool S1 40W Rotary Bundle. 237 buyers give it 4.6/5, which is a solid sign. Where it falls short: the listing says nothing about air assist, and at 40 W you'll want it for clean cuts in wood, so budget for a kit. If your materials and your bench match, this is where we'd put our money. If your numbers don't fit, the xTool F2 Dual Laser is the next one to look at.

Living with it

Delivery day

Mostly ready out of the box, per the listing. Unpack it, level it, connect the software and give it a spot near a window or the exhaust.

The first project

Run a settings grid on scrap wood before the first real gift. Our settings grid guide has the routine.

Day to day

Lid closed, extraction running, and a quick wipe of the lens every few jobs. Our focus and alignment guide has the rest.

Tumbler season

The rotary in the box takes care of the tumbler and glass orders without a second purchase; check its diameter range first.

What buyers say

Buyers give it 4.6/5, an excellent record, well above this ranking's 4.3 average. 237 reviews is a fair sample, enough for the average to mean something.

The numbers
Buyer rating
4.6/5
Reviews
237
This ranking's average
4.3/5

The one thing we'd check first

One thing to settle before the xTool S1 40W Rotary Bundle ships: check the work area, because 23.93 × 15.16 in has to fit the biggest piece you plan to make, with room for clamps or a rotary.

Before you buy

What you will make

Cut a piece of cardboard to 23.93 × 15.16 in, put your biggest project on it, and see what sticks out. Our buying guide has the layout.

Smoke and air

The cover keeps the smoke in the box, but it still has to go somewhere, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check.

Eyes and fire

Class 1, per the listing, so the beam stays under the cover in normal use. Keep the lid closed, a fire-safe surface underneath, and someone in the room while it runs.

Software

Check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

How it compares

How the xTool S1 40W Rotary Bundle stacks up against the closest alternative in our ranking, the xTool F2 Dual Laser.

CriterionxTool S1 40W Rotary BundlexTool F2 Dual Laser
Our rating9.2/107.7/10
Laser typeNot statedDiode + Infrared
Laser output40 W stated5 W stated
Buyer reviews237 · 4.6/5123 · 4.4/5

On our rating, the xTool S1 40W Rotary Bundle comes out ahead (9.2 vs 7.7), and it brings more stated laser output (40 W) and a higher buyer rating (4.6/5) on top. Start with this one.

The score in detail

How we rated it

Our score: 9.2/10

Buyer rating (45%)

41.4 / 45

4.6/5 average

Review volume (35%)

22.5 / 35

237 buyer reviews

Documented specifications (20%)

16.2 / 20

81/100 listing documentation score

Our rating is an evidence index on a 0–10 scale, separate from the buyer star rating.

  • Buyer rating (45%): the captured average for this exact listing, damped when there are fewer than 50 reviews.
  • Review volume (35%): more reviews mean more reliable evidence, on a logarithmic scale up to 5,000 reviews.
  • Documented specifications (20%): how completely the exact listing documents the attributes that matter.

Our editors also weigh how it compares with the other products in its category.

A commission is never an input to the rating. Read the full methodology.

Read the methodology →

Frequently asked questions

Is the xTool S1 40W Rotary Bundle any good?

We rate it 9.2/10 (excellent), #1 of 5 in our laser engraver ranking. It is based on 237 buyer reviews averaging 4.6/5 and the specifications stated in the listing.

What laser output and work area does the xTool S1 40W Rotary Bundle state?

Its listing states 40 W as its lowest stated laser wattage and a 23.93 × 15.16 in work area. Those are the seller's figures, and a big wattage in a title often describes the power supply or the module rather than the light that reaches your material.

What else do I need with the xTool S1 40W Rotary Bundle?

Check the exact listing and the manual for what ships in the box: smoke extraction or a filter unit, a work surface such as a honeycomb bed, and the software. Never laser PVC, vinyl or unknown plastics, and never leave the machine running on its own. Our laser buying checklist lists the checks.

What do you get with the xTool S1 40W Rotary Bundle?

Its listing states 40 W of stated laser output, a 23.93 × 15.16 in work area, a Class 1 enclosed body, a rotary in the box, auto-focus and up to 600 mm/s of stated speed. These are the seller's figures; how fine the detail comes out on your material and how loud the fans are in your room can't be read from a listing.

What should I check before ordering the xTool S1 40W Rotary Bundle?

What you will make: cut a piece of cardboard to 23.93 × 15.16 in, put your biggest project on it, and see what sticks out. Our buying guide has the layout. Smoke and air: the cover keeps the smoke in the box, but it still has to go somewhere, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check. Eyes and fire: Class 1, per the listing, so the beam stays under the cover in normal use. Keep the lid closed, a fire-safe surface underneath, and someone in the room while it runs. Software: check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

Where can I buy the xTool S1 40W Rotary Bundle?

We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.