The 5 laser engravers we'd put on our own bench in 2026Top 5 laser engravers → See the ranking

xTool F2 Ultra UV Review

5.0Fair · out of 10Not in our top-5 rankings

On paper, the xTool F2 Ultra UV gets the important things right: an enclosed body, a 48 MP camera and auto-focus. A good match for crafting in a spare room instead of a garage, with 26 buyer reviews averaging 4.3/5.

Price$3,799-28%List price $5,299Save $1,500 vs. list pricePrice on Nov 18, 2026 · may have changed
Compare side by side ↗
Specifications
BrandxTool
CategoryLaser engravers
Laser typeUV
Laser output (lowest stated)5 W
Stated speedUp to 15,000 mm/s
Camera48 MP, per the listing
Auto-focusStated in the listing
Materials namedAcrylic, glass
Buyer reviews26 · 4.3/5
ASINB0GFHVHXWJ

Full listing title: xTool F2 Ultra UV Laser Engraver, 5W UV Laser 3D Inner Fine Glass Engraving

Listing evidence
Laser type Exact Full listing title
Laser output (lowest stated)5W Exact listing
Updated October 2026
Exact listing, ASIN B0GFHVHXWJ
Rating from a published formula

Compared with similar laser engravers

The two laser engravers closest to it on our rating, with a dated price.

Compare side by side ↗

xTool F2 Ultra UV

xTool F2 Ultra UV

5.0Fair · out of 10$3,799 -28% List price $5,299Save $1,500 vs. list price Price on Nov 18, 2026 · may have changed
  • Stated: UV · 5 W laser
  • 26 buyer reviews
  • Laser engravers
This product ↑
ACMER S2

ACMER S2

5.1Fair · out of 10$251.99 -10% Was $279.99Save $28 vs. its previous price Price on Nov 18, 2026 · may have changed
  • Stated: 12 W laser · 300 × 300 mm
  • 36 buyer reviews
  • Laser engravers
See the review ↗
xTool P3 80W CO2

xTool P3 80W CO2

5.0Fair · out of 10$5,899 -16% List price $6,999Save $1,100 vs. list price Price on Nov 18, 2026 · may have changed
  • Stated: CO2 · 5 W laser
  • 22 buyer reviews
  • Laser engravers
See the review ↗

Laser output, per the listing

The lowest laser wattage the listing states, which is the one we compare. It comes with a uv source. How deep it goes on your material is for a settings grid to tell.

What it has going for it

What changes at your bench

5 W of laser output, per the listing. An engraver first: happy on wood, leather and coated metal, patient on cuts. We read the lowest laser wattage the listing states, so this is the number to compare.

Enclosed design, per the listing. The beam stays under the cover in normal use and the smoke leaves through one port, which is what makes a laser livable in a spare room. That port still needs a window or a filter. Our safety and enclosures guide covers the rest.

48 MP camera. You see the bed on screen and drop the design where the piece actually sits, which saves blanks on odd shapes and second-hand finds.

Spare room or garage?

For a spare room or a study, the enclosed body keeps the beam and the smoke in one box. The camera lets you place designs on screen without leaning over the machine.

On balance it can live in the house, as long as the exhaust reaches a window or a filter.

Great for you if…

  • Kids or pets share the house with the laser
  • You hate wasting blanks on crooked jobs

Skip it if…

  • You plan to cut thick wood: 5 W of stated output means many slow passes
  • You need to mark bare steel: that usually takes a fiber or infrared source
  • You want a long review record: only 26 buyer reviews so far

What xTool promises

The seller states, word for word, in the xTool F2 Ultra UV listing:

  • xTool F2 Ultra UV laser engraver machine delivers the simplest solution for 3D engraving inside glass and crystal with flawless results.
  • The desktop laser engraver supports the widest range of materials to expand your creative business.
  • Featuring a UV spot size smaller than 10μm, this laser engraving machine achieves micron-level accuracy that exceeds standard CO2 lasers.
  • F2 Ultra UV portable laser engraver equipped with dual 48MP cameras for next-level auto-focus and alignment.
  • F2 Ultra UV Laser Engraver is a Class 4 laser engraver, and the laser output is 5000mW.

These are the seller's own words and figures.

xTool F2 Ultra UV, view 3

Work area, power and what's in the box

What the xTool F2 Ultra UV listing names:

  • UV laser
  • 5 W of stated laser output
  • Up to 15,000 mm/s, stated
  • Enclosed body
  • Camera, auto-focus

Plan the bench and the exhaust route before the box arrives.

xTool F2 Ultra UV, view 4

Price and cost per watt of laser output

$3,799 -28% List price $5,299Save $1,500 vs. list price Price on Nov 18, 2026 · may have changed

At the price on Nov 18, 2026, each stated watt of laser output costs about $760. That puts it in the pricier third of the 51 laser engravers we have a price for.

Only a rough yardstick: the work area, the enclosure, the size and what comes in the box count as much.

The button opens the exact listing (ASIN B0GFHVHXWJ), where today's price, stock and seller apply.

xTool F2 Ultra UV, view 5

A better fit for your projects?

Want to cut thicker stock? The xTool S1 40W Rotary Bundle (9.2/10) states 40 W of laser output.

Want air assist built in? The Twotrees TTS-55 Pro (9.1/10) lists air assist.

Our take

The verdict

On the xTool F2 Ultra UV, an enclosed body is what caught our eye, and a 48 MP camera doesn't hurt either. Only 26 buyers have rated it so far (4.3/5), so treat the score as an early read. The catch with this xTool laser engraver: no word on the work area. We'd pick it if kids or pets share the house with the laser; otherwise, put it next to the ACMER S2 first.

Living with it

Delivery day

Unpack, check the parts against the manual, then give it a spot near a window or the exhaust before you plug in.

The first project

Run a settings grid on scrap acrylic before the first real gift. Our settings grid guide has the routine.

Day to day

Lid closed, extraction running, and a quick wipe of the lens every few jobs. Our focus and alignment guide has the rest.

What buyers say

Buyers give it 4.3/5, a solid record, right on our ranked picks' 4.3 average. Only 26 reviews so far, and our formula damps averages built on fewer than 50.

The numbers
Buyer rating
4.3/5
Reviews
26
Ranked picks' average
4.3/5

The one thing we'd check first

One thing to settle before the xTool F2 Ultra UV ships: check the work area, because the listing states 5 W but no clear work area, and the bed size decides what you can make.

Before you buy

What you will make

The listing gives no work area, so find the bed size in the manual or ask the seller before you order. Then cut a piece of cardboard to that size and put your biggest project on it. Our buying guide has the layout.

Smoke and air

The cover keeps the smoke in the box, but it still has to go somewhere, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check.

Eyes and fire

An open beam needs safety glasses for its exact wavelength, a fire-safe surface and someone in the room. Our safety and enclosures guide explains enclosures.

Software

Check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

How it compares

How the xTool F2 Ultra UV stacks up against the closest alternative, the ACMER S2.

CriterionxTool F2 Ultra UVACMER S2
Our rating5.0/105.1/10
Laser typeUVNot stated
Laser output5 W stated12 W stated
Buyer reviews26 · 4.3/536 · 4.4/5

Pick the ACMER S2 if you want our higher-rated option (5.1/10), with more stated laser output (12 W).

The score in detail

How we rated it

Our score: 5.0/10

Buyer rating (45%)

20.1 / 45

4.3/5 average, confidence-damped (26 reviews < 50)

Review volume (35%)

13.5 / 35

26 buyer reviews

Documented specifications (20%)

16.2 / 20

81/100 listing documentation score

Our rating is an evidence index on a 0–10 scale, separate from the buyer star rating.

  • Buyer rating (45%): the captured average for this exact listing, damped when there are fewer than 50 reviews.
  • Review volume (35%): more reviews mean more reliable evidence, on a logarithmic scale up to 5,000 reviews.
  • Documented specifications (20%): how completely the exact listing documents the attributes that matter.

Our editors also weigh how it compares with the other products in its category.

A commission is never an input to the rating. Read the full methodology.

Read the methodology →

Frequently asked questions

Is the xTool F2 Ultra UV any good?

We rate it 5.0/10 (fair). It is based on 26 buyer reviews averaging 4.3/5 and the specifications stated in the listing.

What laser output and work area does the xTool F2 Ultra UV state?

Its listing states a UV source and 5 W as its lowest stated laser wattage. Those are the seller's figures, and a big wattage in a title often describes the power supply or the module rather than the light that reaches your material.

What else do I need with the xTool F2 Ultra UV?

Check the exact listing and the manual for what ships in the box: smoke extraction or a filter unit, a work surface such as a honeycomb bed, and the software. Never laser PVC, vinyl or unknown plastics, and never leave the machine running on its own. Our laser buying checklist lists the checks.

What do you get with the xTool F2 Ultra UV?

Its listing states an enclosed body, a 48 MP camera, auto-focus and up to 15,000 mm/s of stated speed. These are the seller's figures; how fine the detail comes out on your material and how loud the fans are in your room can't be read from a listing.

What should I check before ordering the xTool F2 Ultra UV?

What you will make: the listing gives no work area, so find the bed size in the manual or ask the seller before you order. Then cut a piece of cardboard to that size and put your biggest project on it. Our buying guide has the layout. Smoke and air: the cover keeps the smoke in the box, but it still has to go somewhere, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check. Eyes and fire: an open beam needs safety glasses for its exact wavelength, a fire-safe surface and someone in the room. Our safety and enclosures guide explains enclosures. Software: check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

Where can I buy the xTool F2 Ultra UV?

We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.

Keep comparing

If the xTool F2 Ultra UV hasn't sold you yet, see where it ranks, read the guides that feature it or browse all laser engravers.

Read this before you buy