The 5 laser engravers we'd put on our own bench in 2026Top 5 laser engravers → See the ranking

xTool F2 with Slide, RA3 and Purifier Review

5.7Fair · out of 10Not in our top-5 rankings

The xTool F2 with Slide (RA3 and Purifier) packs an enclosed body, a 50 MP camera and a handheld body you can take anywhere into one dual-laser engraver. It suits makers who want two lasers in one machine, and its sibling listing, the xTool F2 Dual Laser, holds #2 in our laser engraver ranking.

Variants of this model

Each variant has its own page.

Price$1,929-29%List price $2,699Save $770 vs. list pricePrice on Nov 18, 2026 · may have changed
Compare side by side ↗
Specifications
BrandxTool
CategoryLaser engravers
Laser typeDiode + Infrared
Laser output (lowest stated)5 W
Stated speedUp to 6,000 mm/s
Stated precision0.1 mm
Camera50 MP, per the listing
Buyer reviews35 · 3.9/5
ASINB0G1LNZLHZ

Full listing title: xTool F2 5W IR & 15W Diode Dual Laser Engraver, with Slide Extension, RA3 Rotary, Air Purifier, 50MP Camera, 6000mm/s Ultra Fast, 3D Embossing, Color Marking on Metal, Portable Laser Engraving Machine

Listing evidence
Laser type Exact Full listing title
Laser output (lowest stated)5W Exact listing
Updated October 2026
Exact listing, ASIN B0G1LNZLHZ
Rating from a published formula

Compared with similar laser engravers

The two laser engravers closest to it on our rating, with a dated price.

Compare side by side ↗

xTool F2 with Slide, RA3 and Purifier

xTool F2 with Slide, RA3 and Purifier

5.7Fair · out of 10$1,929 -29% List price $2,699Save $770 vs. list price Price on Nov 18, 2026 · may have changed
  • Stated: Diode + Infrared · 5 W laser
  • 35 buyer reviews
  • Laser engravers
This product ↑
xTool M2 10W Color Craft

xTool M2 10W Color Craft

5.5Fair · out of 10$529 -41% List price $899Save $370 vs. list price Price on Nov 18, 2026 · may have changed
  • Stated: Diode · 3 W laser
  • 27 buyer reviews
  • Laser engravers
See the review ↗

Laser output, per the listing

The title says 15 W. The listing's laser output is 5 W, and that is the number we compare. It comes with a diode + infrared source. How deep it goes on your material is for a settings grid to tell.

What it has going for it

What changes at your bench

5 W of laser output, per the listing. An engraver first: happy on wood, leather and coated metal, patient on cuts. The title says 15 W; we compare the 5 W of laser output the listing states, and so should you.

Enclosed design, per the listing. The beam stays under the cover in normal use and the smoke leaves through one port, which is what makes a laser livable in a spare room. That port still needs a window or a filter. Our safety and enclosures guide covers the rest.

50 MP camera. You see the bed on screen and drop the design where the piece actually sits, which saves blanks on odd shapes and second-hand finds.

Spare room or garage?

For a spare room or a study, the enclosed body keeps the beam and the smoke in one box. The camera lets you place designs on screen without leaning over the machine. A handheld fits in a drawer when the job is done.

On balance it can live in the house, as long as the exhaust reaches a window or a filter.

Great for you if…

  • Kids or pets share the house with the laser
  • You hate wasting blanks on crooked jobs
  • You want to engrave at markets or on big objects

Skip it if…

  • You want the work area spelled out: the listing we read gives no work area in millimetres
  • You plan to cut thick wood: 5 W of stated output means many slow passes
  • You want a long review record: only 35 buyer reviews so far
  • Star ratings come first for you: 3.9/5 is below the 4.3 average of our ranked picks

What xTool promises

The seller states, word for word, in the xTool F2 with Slide (RA3 and Purifier) listing:

  • Our 15W Diode & 5W IR dual-laser combo makes this laser engraver truly versatile, unlocking more possibilities on 300+ materials.
  • Its 0.00199" motion accuracy ensures crystal-clear, high-resolution engravings that capture every detail with perfection.
  • The enhanced dual laser delivers the same high-quality results in half the time.
  • Weighing only 4.6 kg, effortlessly bring your personalization service to fairs, pop-ups, and markets.
  • The 50MP camera ensures precise positioning, while built-in material presets eliminate guesswork.

These are the seller's own words and figures.

xTool F2 with Slide, RA3 and Purifier, view 3

Work area, power and what's in the box

What the xTool F2 with Slide (RA3 and Purifier) listing names:

  • Diode + Infrared laser
  • 5 W of stated laser output (15 W in the title)
  • Up to 6,000 mm/s, stated
  • Enclosed body
  • Camera
  • Arrives mostly assembled

Plan the bench and the exhaust route before the box arrives.

xTool F2 with Slide, RA3 and Purifier, view 4

Price and cost per watt of laser output

$1,929 -29% List price $2,699Save $770 vs. list price Price on Nov 18, 2026 · may have changed

At the price on Nov 18, 2026, each stated watt of laser output costs about $386. That puts it in the pricier third of the 51 laser engravers we have a price for.

Only a rough yardstick: the work area, the enclosure, the size and what comes in the box count as much.

The button opens the exact listing (ASIN B0G1LNZLHZ), where today's price, stock and seller apply. Sizes and bundles of the same family often sit at different prices.

xTool F2 with Slide, RA3 and Purifier, view 5

A better fit for your projects?

Want to cut thicker stock? The xTool S1 40W Rotary Bundle (9.2/10) states 40 W of laser output.

Want air assist built in? The Twotrees TTS-55 Pro (9.1/10) lists air assist.

Our take

The verdict

On the xTool F2 with Slide (RA3 and Purifier), an enclosed body is what caught our eye, and a 50 MP camera doesn't hurt either. Only 35 buyers have rated it so far (3.9/5), so treat the score as an early read. Where it falls short: its 3.9/5 buyer average sits under the 4.3 of our ranked picks. We'd pick it if kids or pets share the house with the laser; otherwise, put it next to the GWEIKE G2 Pro 30W Fiber first.

Living with it

Delivery day

Mostly ready out of the box, per the listing. Unpack it, level it, connect the software and give it a spot near a window or the exhaust.

The first project

Run a settings grid on scrap metal before the first real gift. Our settings grid guide has the routine.

Day to day

Lid closed, extraction running, and a quick wipe of the lens every few jobs. Our focus and alignment guide has the rest.

What buyers say

Buyers give it 3.9/5, a mixed record, below our ranked picks' 4.3 average. Only 35 reviews so far, and our formula damps averages built on fewer than 50.

The numbers
Buyer rating
3.9/5
Reviews
35
Ranked picks' average
4.3/5

The one thing we'd check first

One thing to settle before the xTool F2 with Slide (RA3 and Purifier) ships: check the wattage, because the 15 W in the title is not the 5 W of laser output the listing states, and the second number is the one that cuts.

Before you buy

What you will make

Lay your biggest cutting board or sign next to that number; tumblers and glasses need a rotary. Our buying guide has the bench layout.

Smoke and air

The cover keeps the smoke in the box, but it still has to go somewhere, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check.

Eyes and fire

An open beam needs safety glasses for its exact wavelength, a fire-safe surface and someone in the room. Our safety and enclosures guide explains enclosures.

Software

Check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

How it compares

How the xTool F2 with Slide (RA3 and Purifier) stacks up against the closest alternative, the GWEIKE G2 Pro 30W Fiber.

CriterionxTool F2 with Slide, RA3 and PurifierGWEIKE G2 Pro 30W Fiber
Our rating5.7/105.7/10
Laser typeDiode + InfraredFiber
Laser output5 W stated30 W stated
Fiber sourceNot stated30 W
Buyer reviews35 · 3.9/543 · 3.9/5

Both score 5.7/10. The GWEIKE G2 Pro 30W Fiber adds more stated laser output (30 W).

The score in detail

How we rated it

Our score: 5.7/10

Buyer rating (45%)

24.6 / 45

3.9/5 average, confidence-damped (35 reviews < 50)

Review volume (35%)

14.7 / 35

35 buyer reviews

Documented specifications (20%)

17.6 / 20

88/100 listing documentation score

Our rating is an evidence index on a 0–10 scale, separate from the buyer star rating.

  • Buyer rating (45%): the captured average for this exact listing, damped when there are fewer than 50 reviews.
  • Review volume (35%): more reviews mean more reliable evidence, on a logarithmic scale up to 5,000 reviews.
  • Documented specifications (20%): how completely the exact listing documents the attributes that matter.

Our editors also weigh how it compares with the other products in its category.

A commission is never an input to the rating. Read the full methodology.

Read the methodology →

Frequently asked questions

Is the xTool F2 with Slide (RA3 and Purifier) any good?

We rate it 5.7/10 (fair). It is based on 35 buyer reviews averaging 3.9/5 and the specifications stated in the listing.

What laser output and work area does the xTool F2 with Slide, RA3 and Purifier state?

Its listing states a diode + infrared source and 5 W as its lowest stated laser wattage. Those are the seller's figures, and a big wattage in a title often describes the power supply or the module rather than the light that reaches your material.

What else do I need with the xTool F2 with Slide, RA3 and Purifier?

Check the exact listing and the manual for what ships in the box: smoke extraction or a filter unit, a work surface such as a honeycomb bed, and the software. Never laser PVC, vinyl or unknown plastics, and never leave the machine running on its own. Our laser buying checklist lists the checks.

What do you get with the xTool F2 with Slide (RA3 and Purifier)?

Its listing states an enclosed body, a 50 MP camera, a handheld body you can take anywhere, an infrared laser for metal and up to 6,000 mm/s of stated speed. These are the seller's figures; how fine the detail comes out on your material and how loud the fans are in your room can't be read from a listing.

What should I check before ordering the xTool F2 with Slide (RA3 and Purifier)?

What you will make: lay your biggest cutting board or sign next to that number; tumblers and glasses need a rotary. Our buying guide has the bench layout. Smoke and air: the cover keeps the smoke in the box, but it still has to go somewhere, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check. Eyes and fire: an open beam needs safety glasses for its exact wavelength, a fire-safe surface and someone in the room. Our safety and enclosures guide explains enclosures. Software: check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

Where can I buy the xTool F2 with Slide (RA3 and Purifier)?

We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.

Keep comparing

If the xTool F2 with Slide, RA3 and Purifier hasn't sold you yet, see where it ranks, read the guides that feature it or browse all laser engravers.

Read this before you buy