The 5 laser engravers we'd put on our own bench in 2026Top 5 laser engravers → See the ranking

Twotrees TTS-10 Pro Review

7.2Good · out of 10Not in our top-5 rankings

We like the Twotrees TTS-10 Pro for the mix: 10 W of laser power on paper, 300 × 300 mm of work area and Wi-Fi or app control. It suits side projects that start small, and its sibling listing, the Twotrees TTS-55 Pro, holds #1 in our laser engraver for beginners ranking.

Variants of this model

Each variant has its own page.

Specifications
BrandTwotrees
CategoryLaser engravers
Laser typeDiode
Laser output (lowest stated)10 W
Stated work area300 × 300 mm
ConnectivityWi-Fi or app, offline mode
Software namedLightBurn
Materials namedWood, leather, acrylic, glass, metal
Returns30 days, per the listing
Buyer reviews495 · 4.4/5
ASINB0HDNCZL8V

Full listing title: Twotrees TTS-10 Pro Laser Engraver,10000mW High Precision Laser Engraving

Listing evidence
Laser type Exact Full listing title
Laser output (lowest stated)10000mW Exact listing
Stated work area300x300mm Exact listing
Updated October 2026
Exact listing, ASIN B0HDNCZL8V
Rating from a published formula

Compared with similar laser engravers

The two laser engravers closest to it on our rating, with a dated price where we have one.

Compare side by side ↗

Twotrees TTS-10 Pro

Twotrees TTS-10 Pro

7.2Good · out of 10$230.99 Price on Nov 18, 2026 · may have changed
  • Stated: Diode · 10 W laser · 300 × 300 mm
  • 495 buyer reviews
  • Laser engravers
This product ↑

Laser output, per the listing

The lowest laser wattage the listing states, which is the one we compare. It comes with a diode source and a 300 × 300 mm work area. How deep it goes on your material is for a settings grid to tell.

What it has going for it

What changes at your bench

10 W of laser output, per the listing. A solid middle: quick engraving, and thin wood cut in a few passes. We read the lowest laser wattage the listing states, so this is the number to compare.

300 × 300 mm work area. Enough for coasters, tags and small signs; bigger boards need a second setup or a bigger machine. Our buying guide plans the bench around it.

Wi-Fi or app control. Send jobs from the laptop in the next room or from your phone, without a USB cable across the floor.

Spare room or garage?

For a spare room or a study, jobs can go over Wi-Fi or the app from your desk.

For a garage or a workshop, an open frame belongs where smoke and stray light bother nobody.

On balance it is happiest in a garage or a workshop, glasses on and the exhaust going outside.

Great for you if…

  • You trust a long track record: 495 buyer reviews

Skip it if…

  • You want the beam and the smoke under a cover: the listing we read describes an open frame
  • You need to mark bare steel: that usually takes a fiber or infrared source
  • You want to place designs on screen: the listing names no camera

What Twotrees promises

The seller states, word for word, in the Twotrees TTS-10 Pro listing:

  • If your project requires larger than 12 inches, Please measure your workpiece before purchasing to avoid size mismatches.
  • Main Board Upgrade Laser engraving the mainboard adopts 32-bit dual-core MCU with various functions.
  • Full Metal Frame & Reliable Motion System Built with aluminum alloy + injection-molded parts, dual Y-axis motors (42 stepper), and GT2-6mm synchronous belts.
  • Software Compatibility and TF Card Offline Work Comes with a detailed manual, TF card (4GB), card reader, and all necessary assembly tools.
  • Based Support – No More “Better Option” Regrets TTS-10 Pro includes CE, FCC, ROHS, FDA, and UL62368 certifications.

These are the seller's own words and figures.

Twotrees TTS-10 Pro, view 3

Work area, power and what's in the box

What the Twotrees TTS-10 Pro listing names:

  • Diode laser
  • 10 W of stated laser output
  • 300 × 300 mm work area
  • Wi-Fi or app, LightBurn named, offline mode
  • Assembly required

That is the seller's promise, not ours. Keep the receipt with the manual, and read what the terms say about the laser module.

Plan the bench, the exhaust route and the glasses before the box arrives.

Twotrees TTS-10 Pro, view 4

Price and cost per watt of laser output

$230.99 Price on Nov 18, 2026 · may have changed

At the price on Nov 18, 2026, each stated watt of laser output costs about $23. That puts it in the cheaper third of the 51 laser engravers we have a price for.

Only a rough yardstick: the work area, the enclosure, the size and what comes in the box count as much.

The button opens the exact listing (ASIN B0HDNCZL8V), where today's price, stock and seller apply. Sizes and bundles of the same family often sit at different prices.

Twotrees TTS-10 Pro, view 5

A better fit for your projects?

Need a bigger work area? The xTool S1 40W Rotary Bundle (9.2/10) states 23.93 × 15.16 in.

Want the beam under a cover? The xTool F2 Dual Laser (7.7/10) is enclosed, per its listing.

Our take

The verdict

The Twotrees TTS-10 Pro earns its place with 10 W of laser power on paper and 300 × 300 mm of work area. 495 buyers back that up with 4.4/5, about as reassuring as a review record gets. Honestly, the catch: an open frame, while most picks here are enclosed. We'd pick it if you trust a long track record; otherwise, put it next to the ATOMSTACK A20 PRO V2 with R8 Rotary first.

Living with it

Delivery day

The listing mentions assembly, so set aside an evening, square the frame and keep the screws sorted.

The first project

Run a settings grid on scrap wood before the first real gift. LightBurn is named in the listing, so the usual grid tools are one menu away. Our settings grid guide has the routine.

Day to day

Glasses on, extraction running, and a quick wipe of the lens every few jobs. Our focus and alignment guide has the rest.

What buyers say

Buyers give it 4.4/5, a strong record, above our ranked picks' 4.3 average. And with 495 reviews behind it, that number is hard to argue with.

The numbers
Buyer rating
4.4/5
Reviews
495
Ranked picks' average
4.3/5

The one thing we'd check first

Before you order the Twotrees TTS-10 Pro: check the work area, because 300 × 300 mm has to fit the biggest piece you plan to make, with room for clamps or a rotary.

Before you buy

What you will make

Cut a piece of cardboard to 300 × 300 mm, put your biggest project on it, and see what sticks out. Our buying guide has the layout.

Smoke and air

An open frame lets the smoke into the room, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check.

Eyes and fire

An open beam needs safety glasses for its exact wavelength, a fire-safe surface and someone in the room. Our safety and enclosures guide explains enclosures.

Software

The listing names LightBurn. Check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

How it compares

How the Twotrees TTS-10 Pro stacks up against the closest alternative, the ATOMSTACK A20 PRO V2 with R8 Rotary.

CriterionTwotrees TTS-10 ProATOMSTACK A20 PRO V2 with R8 Rotary
Our rating7.2/107.2/10
Laser typeDiodeNot stated
Laser output10 W stated20 W stated
Buyer reviews495 · 4.4/5None captured

Both score 7.2/10. The ATOMSTACK A20 PRO V2 with R8 Rotary adds more stated laser output (20 W).

Frequently asked questions

Is the Twotrees TTS-10 Pro any good?

We rate it 7.2/10 (good). It is based on 495 buyer reviews averaging 4.4/5 and the specifications stated in the listing.

What laser output and work area does the Twotrees TTS-10 Pro state?

Its listing states a diode source, 10 W as its lowest stated laser wattage and a 300 × 300 mm work area. Those are the seller's figures, and a big wattage in a title often describes the power supply or the module rather than the light that reaches your material.

What else do I need with the Twotrees TTS-10 Pro?

Check the exact listing and the manual for what ships in the box: safety glasses for its wavelength, smoke extraction or a filter unit, a work surface such as a honeycomb bed, and the software. Never laser PVC, vinyl or unknown plastics, and never leave the machine running on its own. Our laser buying checklist lists the checks.

What do you get with the Twotrees TTS-10 Pro?

Its listing states 10 W of stated laser output, a 300 × 300 mm work area and Wi-Fi or app control. These are the seller's figures; how fine the detail comes out on your material and how loud the fans are in your room can't be read from a listing.

What should I check before ordering the Twotrees TTS-10 Pro?

What you will make: cut a piece of cardboard to 300 × 300 mm, put your biggest project on it, and see what sticks out. Our buying guide has the layout. Smoke and air: an open frame lets the smoke into the room, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check. Eyes and fire: an open beam needs safety glasses for its exact wavelength, a fire-safe surface and someone in the room. Our safety and enclosures guide explains enclosures. Software: the listing names LightBurn. Check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

Where can I buy the Twotrees TTS-10 Pro?

We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.

Keep comparing

If the Twotrees TTS-10 Pro hasn't sold you yet, see where it ranks, read the guides that feature it or browse all laser engravers.

Read this before you buy