The 5 laser engravers we'd put on our own bench in 2026Top 5 laser engravers → See the ranking

WECREAT Vision Pro 45W with AirGuard Review

If you're after 45 W of stated laser output, the WECREAT Vision Pro 45W with AirGuard delivers, with a 19.7 × 12.6 in work area and Class 1 safety under a closed lid on top. It is a good match for big projects and thicker stock, at 7.3/10 on its documented specs.

Specifications
BrandWECREAT
CategoryLaser engravers
Laser typeDiode
Laser output (lowest stated)45 W
Safety featuresClass 1
Materials namedWood, leather, acrylic, metal
ASINB0F7QX4XL6

Full listing title: WECREAT Vision Pro 45W Laser Engraver and Cutter with 2W Switchable Laser Module, 137" Conveyor Feeder, AirGuard Ultra Fume Extractor, Laser Cutter Cuts 1", Laser Engraving Machine for Wood Metal

Listing evidence
Laser type Exact Full listing title
Laser output (lowest stated)45W Exact listing
Updated October 2026
Exact listing, ASIN B0F7QX4XL6
Rating from a published formula

Compared with similar laser engravers

The two diode laser engravers closest to it on our rating, with a dated price.

Compare side by side ↗

WECREAT Vision Pro 45W with AirGuard

WECREAT Vision Pro 45W with AirGuard

7.3Good · out of 10$3,062.16 Price on Nov 18, 2026 · may have changed
  • Stated: Diode · 45 W laser
  • Laser engravers
This product ↑
SCULPFUN S70 MAX 70W

SCULPFUN S70 MAX 70W

7.3Good · out of 10$2,199 Price on Nov 18, 2026 · may have changed
  • Stated: Diode · 70 W laser
  • Laser engravers
See the review ↗
WECREAT 20W Enclosed 4-in-1

WECREAT 20W Enclosed 4-in-1

7.3Good · out of 10$1,290 Price on Nov 18, 2026 · may have changed
  • Stated: Diode · 20 W laser
  • 99 buyer reviews
  • Laser engravers
See the review ↗

Laser output, per the listing

The lowest laser wattage the listing states, which is the one we compare. It comes with a diode source and a 19.7 × 12.6 in work area. How deep it goes on your material is for a settings grid to tell.

What it has going for it

What changes at your bench

45 W of laser output, per the listing. Enough to cut wood and acrylic, not only mark them, in fewer passes. We read the lowest laser wattage the listing states, so this is the number to compare.

19.7 × 12.6 in work area. Enough for coasters, tags and small signs; bigger boards need a second setup or a bigger machine. Our buying guide plans the bench around it.

Class 1 enclosure, per the listing. The beam stays under the cover in normal use and the smoke leaves through one port, which is what makes a laser livable in a spare room. That port still needs a window or a filter. Our safety and enclosures guide covers the rest.

Spare room or garage?

For a spare room or a study, the Class 1 rating in the listing means the beam stays under the cover in normal use.

For a garage or a workshop, 45 W of stated output is cutting power, and cutting makes more smoke than engraving.

On balance it can live in the house, as long as the exhaust reaches a window or a filter.

Great for you if…

  • You want to cut, not only engrave
  • Kids or pets share the house with the laser

Skip it if…

  • You need to mark bare steel: that usually takes a fiber or infrared source
  • You'd rather wait for buyer reviews: none are captured for this listing yet
  • You want to place designs on screen: the listing names no camera

What WECREAT promises

The seller states, word for word, in the WECREAT Vision Pro 45W with AirGuard listing:

  • The same 137" working area is now even wider with the Auto PassThrough Conveyor.
  • SGS Class 1 full metal enclosure and AirGuard Ultra Fume Extractor keeps you safe, and your workspace free from odor from materials like acrylic and leather.

These are the seller's own words and figures.

WECREAT Vision Pro 45W with AirGuard, view 3

Work area, power and what's in the box

What the WECREAT Vision Pro 45W with AirGuard listing names:

  • Diode laser
  • 45 W of stated laser output
  • 19.7 × 12.6 in work area
  • Class 1 enclosure

Plan the bench and the exhaust route before the box arrives.

WECREAT Vision Pro 45W with AirGuard, view 4

Price and cost per watt of laser output

$3,062.16 Price on Nov 18, 2026 · may have changed

At the price on Nov 18, 2026, each stated watt of laser output costs about $68. That puts it around the middle of the 51 laser engravers we have a price for.

Only a rough yardstick: the work area, the enclosure, the size and what comes in the box count as much.

The button opens the exact listing (ASIN B0F7QX4XL6), where today's price, stock and seller apply.

WECREAT Vision Pro 45W with AirGuard, view 5

A better fit for your projects?

Want a rotary in the box? The xTool S1 40W Rotary Bundle (9.2/10) comes with a rotary, per its title.

Our take

The verdict

Our favourite thing about the WECREAT Vision Pro 45W with AirGuard is 45 W of stated laser output, closely followed by a 19.7 × 12.6 in work area. No buyer reviews yet, so the WECREAT Vision Pro 45W with AirGuard has to win you over on paper. Our main reservation: the listing says nothing about air assist, and at 45 W you'll want it for clean cuts in wood, so budget for a kit. We'd pick it if you want to cut, not only engrave; otherwise, put it next to the SCULPFUN S70 MAX 70W first.

Living with it

Delivery day

Unpack, check the parts against the manual, then give it a spot near a window or the exhaust before you plug in.

The first project

Run a settings grid on scrap wood before the first real gift. Our settings grid guide has the routine.

Day to day

Lid closed, extraction running, and a quick wipe of the lens every few jobs. Our focus and alignment guide has the rest.

The one thing we'd check first

Before you add the WECREAT Vision Pro 45W with AirGuard to your cart: check the work area, because 19.7 × 12.6 in has to fit the biggest piece you plan to make, with room for clamps or a rotary.

Before you buy

What you will make

Cut a piece of cardboard to 19.7 × 12.6 in, put your biggest project on it, and see what sticks out. Our buying guide has the layout.

Smoke and air

The cover keeps the smoke in the box, but it still has to go somewhere, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check.

Eyes and fire

Class 1, per the listing, so the beam stays under the cover in normal use. Keep the lid closed, a fire-safe surface underneath, and someone in the room while it runs.

Software

Check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

How it compares

How the WECREAT Vision Pro 45W with AirGuard stacks up against the closest alternative, the SCULPFUN S70 MAX 70W.

CriterionWECREAT Vision Pro 45W with AirGuardSCULPFUN S70 MAX 70W
Our rating7.3/107.3/10
Laser output45 W stated70 W stated
Work area19.7 × 12.6 in32.7 × 31.5 in

Both score 7.3/10. The SCULPFUN S70 MAX 70W adds more stated laser output (70 W) and a bigger work area (32.7 × 31.5 in).

The score in detail

How we rated it

Spec-based rating on a 4.5–8.5 scale: 4.5 + average of the 4 criteria × 0.4. Capped at 8.5 because no customer evidence is included.

Key specifications

8 / 10

Build, warranty & certifications

6 / 10

Listing documentation

7 / 10

Fit & compatibility

7 / 10

This product has no captured buyer-review record yet, so its rating comes from the documented listing alone: four criteria scored out of 10 (key specifications; build, warranty and certifications; listing documentation; fit and compatibility), placed on a 4.5–8.5 scale. Read the full methodology.

Read the methodology →

Frequently asked questions

Is the WECREAT Vision Pro 45W with AirGuard any good?

We rate it 7.3/10 (good). The rating comes from its documented listing alone, as no customer-review record is captured yet.

What laser output and work area does the WECREAT Vision Pro 45W with AirGuard state?

Its listing states a diode source, 45 W as its lowest stated laser wattage and a 19.7 × 12.6 in work area. Those are the seller's figures, and a big wattage in a title often describes the power supply or the module rather than the light that reaches your material.

What else do I need with the WECREAT Vision Pro 45W with AirGuard?

Check the exact listing and the manual for what ships in the box: smoke extraction or a filter unit, a work surface such as a honeycomb bed, and the software. Never laser PVC, vinyl or unknown plastics, and never leave the machine running on its own. Our laser buying checklist lists the checks.

What do you get with the WECREAT Vision Pro 45W with AirGuard?

Its listing states 45 W of stated laser output, a 19.7 × 12.6 in work area and a Class 1 enclosed body. These are the seller's figures; how fine the detail comes out on your material and how loud the fans are in your room can't be read from a listing.

What should I check before ordering the WECREAT Vision Pro 45W with AirGuard?

What you will make: cut a piece of cardboard to 19.7 × 12.6 in, put your biggest project on it, and see what sticks out. Our buying guide has the layout. Smoke and air: the cover keeps the smoke in the box, but it still has to go somewhere, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check. Eyes and fire: Class 1, per the listing, so the beam stays under the cover in normal use. Keep the lid closed, a fire-safe surface underneath, and someone in the room while it runs. Software: check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

Where can I buy the WECREAT Vision Pro 45W with AirGuard?

We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.

Keep comparing

If the WECREAT Vision Pro 45W with AirGuard hasn't sold you yet, see where it ranks, read the guides that feature it or browse all laser engravers.

Read this before you buy