The 5 laser engravers we'd put on our own bench in 2026Top 5 laser engravers → See the ranking

OMTech K40+ 45W CO2 with Rotary Review

We like the OMTech K40+ 45W CO2 with Rotary for the mix: 45 W of laser power on paper, 12 × 8 in of work area and a rotary for tumblers included. Think of it for acrylic signs, wood and leather at a faster clip: 6.7/10 on what its listing documents.

Specifications
BrandOMTech
CategoryLaser engravers
Laser typeCO2
Laser output (lowest stated)45 W
Air assistStated in the listing
Safety featuresEmergency stop
Software namedLightBurn
RotaryIncluded, per the title
Materials namedWood, leather, acrylic, fabric
ASINB0CYT3BCSR

Full listing title: OMTech K40+ 45W CO2 Laser Engraver & Cutter with Rotary Axis

Listing evidence
Laser type Exact Full listing title
Laser output (lowest stated)45W Exact listing
Updated October 2026
Exact listing, ASIN B0CYT3BCSR
Rating from a published formula

Compared with similar laser engravers

The two laser engravers closest to it on our rating, with a dated price where we have one.

Compare side by side ↗

OMTech K40+ 45W CO2 with Rotary

OMTech K40+ 45W CO2 with Rotary

6.7Good · out of 10$899.99 Price on Nov 18, 2026 · may have changed
  • Stated: CO2 · 45 W laser
  • Laser engravers
This product ↑
Creality Falcon A1 10W

Creality Falcon A1 10W

6.7Good · out of 10$549 Price on Nov 18, 2026 · may have changed
  • Stated: 10 W laser · 460 × 346 mm
  • 147 buyer reviews
  • Laser engravers
See the review ↗

Laser output, per the listing

The lowest laser wattage the listing states, which is the one we compare. It comes with a CO2 source and a 12 × 8 in work area. How deep it goes on your material is for a settings grid to tell.

What it has going for it

What changes at your bench

45 W of laser output, per the listing. Enough to cut wood and acrylic, not only mark them, in fewer passes. We read the lowest laser wattage the listing states, so this is the number to compare.

12 × 8 in work area. Compact: name tags, keychains and small gifts. Measure your biggest blank against it. Our buying guide plans the bench around it.

Rotary included. Tumblers, glasses and rolling pins from day one, without a second order. Check which diameters it takes before you buy the blanks; our rotary guide has the routine.

Spare room or garage?

For a garage or a workshop, an open frame belongs where smoke and stray light bother nobody. 45 W of stated output is cutting power, and cutting makes more smoke than engraving.

On balance it is happiest in a garage or a workshop, glasses on and the exhaust going outside.

Great for you if…

  • You want to cut, not only engrave
  • Tumblers and glasses are on your list
  • You want cleaner cuts on wood

Skip it if…

  • You'd rather wait for buyer reviews: none are captured for this listing yet
  • You want to place designs on screen: the listing names no camera
  • You want to send jobs over Wi-Fi: the listing names no wireless option

What OMTech promises

The seller states, word for word, in the OMTech K40+ 45W CO2 with Rotary listing:

  • Please note that the laser engraver and the rotary axis will arrive in two different packages due to logistics handling.
  • Upgraded to 45W, our laser cutter now slices through 0.4" (10mm) acrylic and 0.31" (8mm) wood with ease.
  • By blowing away smoke and debris, the advanced 45° air assist keeps your work area cleaner, improves cutting accuracy, and minimizes fire risks for safer operation.

These are the seller's own words and figures.

OMTech K40+ 45W CO2 with Rotary, view 3

Work area, power and what's in the box

What the OMTech K40+ 45W CO2 with Rotary listing names:

  • CO2 laser
  • 45 W of stated laser output
  • 12 × 8 in work area
  • Air assist
  • Rotary included
  • LightBurn named

Plan the bench, the exhaust route and the glasses before the box arrives.

OMTech K40+ 45W CO2 with Rotary, view 4

Price and cost per watt of laser output

$899.99 Price on Nov 18, 2026 · may have changed

At the price on Nov 18, 2026, each stated watt of laser output costs about $20. That puts it in the cheaper third of the 51 laser engravers we have a price for.

Only a rough yardstick: the work area, the enclosure, the size and what comes in the box count as much.

The button opens the exact listing (ASIN B0CYT3BCSR), where today's price, stock and seller apply.

OMTech K40+ 45W CO2 with Rotary, view 5

A better fit for your projects?

Need a bigger work area? The xTool S1 40W Rotary Bundle (9.2/10) states 23.93 × 15.16 in.

Our take

The verdict

The OMTech K40+ 45W CO2 with Rotary earns its place with 45 W of laser power on paper and 12 × 8 in of work area. No buyer reviews yet, so the OMTech K40+ 45W CO2 with Rotary has to win you over on paper. The catch with the OMTech K40+ 45W CO2 with Rotary: there's no camera in the listing, so you'll line designs up by framing the job first, not by dragging them over a photo of the bed. We'd pick the OMTech K40+ 45W CO2 with Rotary if you want to cut, not only engrave; otherwise, put it next to the Ortur Laser Master 3 LE 5W first.

Living with it

Delivery day

Unpack, check the parts against the manual, then give it a spot near a window or the exhaust before you plug in.

The first project

Run a settings grid on scrap wood before the first real gift. LightBurn is named in the listing, so the usual grid tools are one menu away. Our settings grid guide has the routine.

Day to day

Air on for cuts, glasses on, extraction running, and a quick wipe of the lens every few jobs. Our focus and alignment guide has the rest.

Tumbler season

The rotary in the box takes care of the tumbler and glass orders without a second purchase; check its diameter range first.

The one thing we'd check first

Before you order the OMTech K40+ 45W CO2 with Rotary: check the work area, because 12 × 8 in has to fit the biggest piece you plan to make, with room for clamps or a rotary.

Before you buy

What you will make

Cut a piece of cardboard to 12 × 8 in, put your biggest project on it, and see what sticks out. Our buying guide has the layout.

Smoke and air

An open frame lets the smoke into the room, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check.

Eyes and fire

An open beam needs safety glasses for its exact wavelength, a fire-safe surface and someone in the room. Our safety and enclosures guide explains enclosures.

Software

The listing names LightBurn. Check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

How it compares

How the OMTech K40+ 45W CO2 with Rotary stacks up against the closest alternative, the Ortur Laser Master 3 LE 5W.

CriterionOMTech K40+ 45W CO2 with RotaryOrtur Laser Master 3 LE 5W
Our rating6.7/106.7/10
Laser typeCO2Diode
Laser output45 W stated5 W stated
Work area12 × 8 in400 × 400 mm

Both score 6.7/10. The Ortur Laser Master 3 LE 5W adds a bigger work area (400 × 400 mm), while the OMTech K40+ 45W CO2 with Rotary brings more stated laser output (45 W).

The score in detail

How we rated it

Spec-based rating on a 4.5–8.5 scale: 4.5 + average of the 4 criteria × 0.4. Capped at 8.5 because no customer evidence is included.

Key specifications

5 / 10

Build, warranty & certifications

4 / 10

Listing documentation

7 / 10

Fit & compatibility

6 / 10

This product has no captured buyer-review record yet, so its rating comes from the documented listing alone: four criteria scored out of 10 (key specifications; build, warranty and certifications; listing documentation; fit and compatibility), placed on a 4.5–8.5 scale. Read the full methodology.

Read the methodology →

Frequently asked questions

Is the OMTech K40+ 45W CO2 with Rotary any good?

We rate it 6.7/10 (good). The rating comes from its documented listing alone, as no customer-review record is captured yet.

What laser output and work area does the OMTech K40+ 45W CO2 with Rotary state?

Its listing states a CO2 source, 45 W as its lowest stated laser wattage and a 12 × 8 in work area. Those are the seller's figures, and a big wattage in a title often describes the power supply or the module rather than the light that reaches your material.

What else do I need with the OMTech K40+ 45W CO2 with Rotary?

Check the exact listing and the manual for what ships in the box: safety glasses for its wavelength, smoke extraction or a filter unit, a work surface such as a honeycomb bed, and the software. Never laser PVC, vinyl or unknown plastics, and never leave the machine running on its own. Our laser buying checklist lists the checks.

What do you get with the OMTech K40+ 45W CO2 with Rotary?

Its listing states 45 W of stated laser output, a 12 × 8 in work area, a rotary in the box and built-in air assist. These are the seller's figures; how fine the detail comes out on your material and how loud the fans are in your room can't be read from a listing.

What should I check before ordering the OMTech K40+ 45W CO2 with Rotary?

What you will make: cut a piece of cardboard to 12 × 8 in, put your biggest project on it, and see what sticks out. Our buying guide has the layout. Smoke and air: an open frame lets the smoke into the room, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check. Eyes and fire: an open beam needs safety glasses for its exact wavelength, a fire-safe surface and someone in the room. Our safety and enclosures guide explains enclosures. Software: the listing names LightBurn. Check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

Where can I buy the OMTech K40+ 45W CO2 with Rotary?

We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.

Keep comparing

If the OMTech K40+ 45W CO2 with Rotary hasn't sold you yet, see where it ranks, read the guides that feature it or browse all laser engravers.

Read this before you buy