The 5 laser engravers we'd put on our own bench in 2026Top 5 laser engravers → See the ranking

OMTech 60W CO2, 28 x 20 in Review

The OMTech 60W CO2 (28 x 20 in) ticks most of the boxes we care about: 60 W of stated laser output, a 500 × 700 mm work area and air assist on board. It makes most sense for a small business that cuts acrylic and wood; we rate it 7.0/10 from its listing.

Specifications
BrandOMTech
CategoryLaser engravers
Laser typeCO2
Laser output (lowest stated)60 W
Stated work area500 × 700 mm
Stated speedUp to 600 mm/s
Air assistStated in the listing
Materials namedWood, leather, glass, metal
ASINB0CQM7F4JB

Full listing title: OMTech 60W CO2 Laser Engraver, 28"x20" Laser Engraving Cutting Machine with Autolift 4 Way Pass Air Assist Water Pump, Commercial Laser Engraver Cutter for Wood Glass Leather More

Listing evidence
Laser type Exact Full listing title
Laser output (lowest stated)60W Exact listing
Stated work area500x700 mm Exact listing
Updated October 2026
Exact listing, ASIN B0CQM7F4JB
Rating from a published formula

Compared with similar laser engravers

The two laser engravers closest to it on our rating, with a dated price where we have one.

Compare side by side ↗

OMTech 60W CO2, 28 x 20 in

OMTech 60W CO2, 28 x 20 in

7.0Good · out of 10$2,199.99 Price on Nov 18, 2026 · may have changed
  • Stated: CO2 · 60 W laser · 500 × 700 mm
  • Laser engravers
This product ↑
ATOMSTACK A20 PRO V2 20W

ATOMSTACK A20 PRO V2 20W

7.0Good · out of 10$389.99 Price on Nov 18, 2026 · may have changed
  • Stated: 20 W laser
  • Laser engravers
See the review ↗

Laser output, per the listing

The lowest laser wattage the listing states, which is the one we compare. It comes with a CO2 source and a 500 × 700 mm work area. How deep it goes on your material is for a settings grid to tell.

What it has going for it

What changes at your bench

60 W of laser output, per the listing. Enough to cut wood and acrylic, not only mark them, in fewer passes. We read the lowest laser wattage the listing states, so this is the number to compare.

500 × 700 mm work area. Room for cutting boards, signs and a whole batch of coasters in one go. Our buying guide plans the bench around it.

Air assist. A jet of air at the nozzle blows the smoke out of the cut: cleaner edges, less charring and fewer flare-ups on wood.

Spare room or garage?

For a garage or a workshop, an open frame belongs where smoke and stray light bother nobody. 60 W of stated output is cutting power, and cutting makes more smoke than engraving. A 500 × 700 mm work area wants a big, sturdy bench.

On balance it is happiest in a garage or a workshop, glasses on and the exhaust going outside.

Great for you if…

  • You want to cut, not only engrave
  • You make signs and cutting boards, not just keychains
  • You want cleaner cuts on wood

Skip it if…

  • You'd rather wait for buyer reviews: none are captured for this listing yet
  • You want to place designs on screen: the listing names no camera
  • You want to send jobs over Wi-Fi: the listing names no wireless option

What OMTech promises

The seller states, word for word, in the OMTech 60W CO2 (28 x 20 in) listing:

  • OMTech's 60W CO2 laser engraver engraves as deep as 0.4" (10 mm) on various nonmetallic materials.
  • This laser engraving machine's motorized workbeds can easily be adjusted up and down at the touch of a button.
  • The honeycomb and aluminum blade beds feature a 20"x28" (500x700 mm) work area to fit most projects.
  • The high-performance DC tube delivers 60W of power for up to 1,000 hours of usage and doubles its lifespan when consistently used at lower settings.
  • Laser Class 2, 0.827 mW output power.

These are the seller's own words and figures.

OMTech 60W CO2, 28 x 20 in, view 3

Work area, power and what's in the box

What the OMTech 60W CO2 (28 x 20 in) listing names:

  • CO2 laser
  • 60 W of stated laser output
  • 500 × 700 mm work area
  • Up to 600 mm/s, stated
  • Air assist

Plan the bench, the exhaust route and the glasses before the box arrives.

OMTech 60W CO2, 28 x 20 in, view 4

Price and cost per watt of laser output

$2,199.99 Price on Nov 18, 2026 · may have changed

At the price on Nov 18, 2026, each stated watt of laser output costs about $37. That puts it around the middle of the 51 laser engravers we have a price for.

Only a rough yardstick: the work area, the enclosure, the size and what comes in the box count as much.

The button opens the exact listing (ASIN B0CQM7F4JB), where today's price, stock and seller apply.

OMTech 60W CO2, 28 x 20 in, view 5

A better fit for your projects?

Want the beam under a cover? The xTool S1 40W Rotary Bundle (9.2/10) is Class 1, per its listing.

Our take

The verdict

On the OMTech 60W CO2 (28 x 20 in), 60 W of stated laser output is what caught our eye, and a 500 × 700 mm work area doesn't hurt either. No buyer reviews yet, so the OMTech 60W CO2 (28 x 20 in) has to win you over on paper. The catch with the OMTech 60W CO2 (28 x 20 in): there's no camera in the listing, so you'll line designs up by framing the job first, not by dragging them over a photo of the bed. We'd pick the OMTech 60W CO2 (28 x 20 in) if you want to cut, not only engrave; otherwise, put it next to the ATOMSTACK A20 PRO V2 20W first.

Living with it

Delivery day

Unpack, check the parts against the manual, then give it a spot near a window or the exhaust before you plug in.

The first project

Run a settings grid on scrap wood before the first real gift. Our settings grid guide has the routine.

Day to day

Air on for cuts, glasses on, extraction running, and a quick wipe of the lens every few jobs. Our focus and alignment guide has the rest.

Batch days

500 × 700 mm fits a row of coasters or a full sign in one go, which is where a bigger bed earns its keep.

The one thing we'd check first

Before you add the OMTech 60W CO2 (28 x 20 in) to your cart: check the work area, because 500 × 700 mm has to fit the biggest piece you plan to make, with room for clamps or a rotary.

Before you buy

What you will make

Cut a piece of cardboard to 500 × 700 mm, put your biggest project on it, and see what sticks out. Our buying guide has the layout.

Smoke and air

An open frame lets the smoke into the room, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check.

Eyes and fire

An open beam needs safety glasses for its exact wavelength, a fire-safe surface and someone in the room. Our safety and enclosures guide explains enclosures.

Software

Check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

How it compares

How the OMTech 60W CO2 (28 x 20 in) stacks up against the closest alternative, the ATOMSTACK A20 PRO V2 20W.

CriterionOMTech 60W CO2, 28 x 20 inATOMSTACK A20 PRO V2 20W
Our rating7.0/107.0/10
Laser typeCO2Not stated
Laser output60 W stated20 W stated

Both score 7.0/10. The OMTech 60W CO2 (28 x 20 in) brings more stated laser output (60 W), so it has the edge on paper.

The score in detail

How we rated it

Spec-based rating on a 4.5–8.5 scale: 4.5 + average of the 4 criteria × 0.4. Capped at 8.5 because no customer evidence is included.

Key specifications

8 / 10

Build, warranty & certifications

4 / 10

Listing documentation

7 / 10

Fit & compatibility

6 / 10

This product has no captured buyer-review record yet, so its rating comes from the documented listing alone: four criteria scored out of 10 (key specifications; build, warranty and certifications; listing documentation; fit and compatibility), placed on a 4.5–8.5 scale. Read the full methodology.

Read the methodology →

Frequently asked questions

Is the OMTech 60W CO2 (28 x 20 in) any good?

We rate it 7.0/10 (good). The rating comes from its documented listing alone, as no customer-review record is captured yet.

What laser output and work area does the OMTech 60W CO2, 28 x 20 in state?

Its listing states a CO2 source, 60 W as its lowest stated laser wattage and a 500 × 700 mm work area. Those are the seller's figures, and a big wattage in a title often describes the power supply or the module rather than the light that reaches your material.

What else do I need with the OMTech 60W CO2, 28 x 20 in?

Check the exact listing and the manual for what ships in the box: safety glasses for its wavelength, smoke extraction or a filter unit, a work surface such as a honeycomb bed, and the software. Never laser PVC, vinyl or unknown plastics, and never leave the machine running on its own. Our laser buying checklist lists the checks.

What do you get with the OMTech 60W CO2 (28 x 20 in)?

Its listing states 60 W of stated laser output, a 500 × 700 mm work area, built-in air assist and up to 600 mm/s of stated speed. These are the seller's figures; how fine the detail comes out on your material and how loud the fans are in your room can't be read from a listing.

What should I check before ordering the OMTech 60W CO2 (28 x 20 in)?

What you will make: cut a piece of cardboard to 500 × 700 mm, put your biggest project on it, and see what sticks out. Our buying guide has the layout. Smoke and air: an open frame lets the smoke into the room, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check. Eyes and fire: an open beam needs safety glasses for its exact wavelength, a fire-safe surface and someone in the room. Our safety and enclosures guide explains enclosures. Software: check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

Where can I buy the OMTech 60W CO2 (28 x 20 in)?

We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.

Keep comparing

If the OMTech 60W CO2, 28 x 20 in hasn't sold you yet, see where it ranks, read the guides that feature it or browse all laser engravers.

Read this before you buy