The 5 laser engravers we'd put on our own bench in 2026Top 5 laser engravers → See the ranking

Skouphy Enclosure with LED Light Review

8.0Very good · out of 10Not in our top-5 rankings

If you're after 720 × 400 mm of enclosure, the Skouphy Enclosure with LED Light delivers, with a 4,000 RPM exhaust fan and fire-resistant panels on top. A good match for keeping smoke and stray light inside, with 290 buyer reviews averaging 4.5/5.

Price$44.58-5%Was $46.99Save $2.41 vs. its previous pricePrice on Nov 18, 2026 · may have changed
Specifications
BrandSkouphy
CategoryEngraver accessories
Product typeEnclosure
Size (stated)720 × 400 mm
Buyer reviews290 · 4.5/5
ASINB0DCZ51QNN

Full listing title: Laser Engraver Integrated Enclosure with LED Light, Fireproof and Dustproof Protective Cover 28.3 * 28.3 * 15.7, Exhaust Fan 4000RPM and Pipe, Against Smoke Odor and Noise Eye Protection-Black

Listing evidence
Product type Exact Full listing title
Updated October 2026
Exact listing, ASIN B0DCZ51QNN
Rating from a published formula

Compared with similar enclosures

The two laser enclosures closest to it on our rating, with a dated price.

Skouphy Enclosure with LED Light

Skouphy Enclosure with LED Light

8.0Very good · out of 10$44.58 -5% Was $46.99Save $2.41 vs. its previous price Price on Nov 18, 2026 · may have changed
  • Stated: Enclosure
  • 290 buyer reviews
  • Engraver accessories
This product ↑
Creality Enclosure Cover V2.0

Creality Enclosure Cover V2.0

7.7Very good · out of 10$45.59 -5% Was $47.99Save $2.40 vs. its previous price Price on Nov 18, 2026 · may have changed
  • Stated: Enclosure
  • 146 buyer reviews
  • Engraver accessories
See the review ↗
Creality Laser Engraver Enclosure

Creality Laser Engraver Enclosure

7.7Very good · out of 10$48.99 Price on Nov 18, 2026 · may have changed
  • Stated: Enclosure
  • 123 buyer reviews
  • Engraver accessories
See the review ↗

What it has going for it

What changes on your machine

720 × 400 mm. Measure your machine with its cables, air hose and any rotary attached; the enclosure needs all of that plus a little air around it.

Exhaust fan, 4,000 RPM. The fan pulls the smoke into a duct; you still need a window or a filter at the other end.

Fire-resistant material, per the listing. A good extra layer around a hot job, not a reason to leave it running alone.

Great for you if…

  • You want the smell out of the room

Skip it if…

  • You want your machine named in the listing: this one names none we could read

What Skouphy promises

The seller states, word for word, in the Skouphy Enclosure with LED Light listing:

  • Such as xtool d1, d1 pro, ortur, sculpfun, atomstack engravers.
  • Thickened PVC visual window can effectively filter blue light from carved light sources.
  • Upgrade all metal support rods make the enclosure more stable and firm.

These are the seller's own words and figures.

Skouphy Enclosure with LED Light, view 3

Size and what it fits

What the Skouphy Enclosure with LED Light listing names:

  • 720 × 400 mm
  • Exhaust fan
  • Fire-resistant material

Match your machine's exact model and generation against the listing before you order.

Skouphy Enclosure with LED Light, view 4

Price and availability

$44.58 -5% Was $46.99Save $2.41 vs. its previous price Price on Nov 18, 2026 · may have changed

The button opens the exact listing (ASIN B0DCZ51QNN), where today's price, stock and seller apply.

Skouphy Enclosure with LED Light, view 5

Our take

The verdict

On the Skouphy Enclosure with LED Light, 720 × 400 mm of enclosure is what caught our eye, and a 4,000 RPM exhaust fan doesn't hurt either. 290 buyers give it 4.5/5, which is a solid sign. The one thing that bugs us: it only fits the machines it lists, so check yours before you order. The Creality Enclosure Cover V2.0 is the one to compare it with first.

Living with it

Setup

Assemble it around the machine, route the cables and the exhaust hose, and make sure the lid closes on everything.

In use

Lid closed while the laser runs, exhaust on, and a look through the window rather than lifting the cover.

What buyers say

Buyers give it 4.5/5, a strong record, above our ranked picks' 4.3 average. 290 reviews is a fair sample, enough for the average to mean something.

The numbers
Buyer rating
4.5/5
Reviews
290
Ranked picks' average
4.3/5

The one thing we'd check first

One thing to settle before the Skouphy Enclosure with LED Light ships: check the size, because 720 × 400 mm has to fit your machine with its cables, air hose and any rotary attached.

Before you buy

Your exact machine

Match your model and its generation against the listing and your manual; a similar photo proves nothing.

The size

Measure your machine's frame and the space around it with a tape, not from the product photo. Our buying guide helps.

What it is for

Our laser buying checklist sorts the add-ons that earn their place from the ones that gather dust.

How it compares

How the Skouphy Enclosure with LED Light stacks up against the closest alternative, the Creality Enclosure Cover V2.0.

CriterionSkouphy Enclosure with LED LightCreality Enclosure Cover V2.0
Our rating8.0/107.7/10
Size720 × 400 mm720 × 400 mm
Exhaust fanStatedStated
Fire-resistantStatedStated
Buyer reviews290 · 4.5/5146 · 4.5/5

On our rating, the Skouphy Enclosure with LED Light comes out ahead (8.0 vs 7.7), so it is the one to start with.

The score in detail

How we rated it

Our score: 8.0/10

Buyer rating (45%)

40.5 / 45

4.5/5 average

Review volume (35%)

23.3 / 35

290 buyer reviews

Documented specifications (20%)

16.2 / 20

81/100 listing documentation score

Our rating is an evidence index on a 0–10 scale, separate from the buyer star rating.

  • Buyer rating (45%): the captured average for this exact listing, damped when there are fewer than 50 reviews.
  • Review volume (35%): more reviews mean more reliable evidence, on a logarithmic scale up to 5,000 reviews.
  • Documented specifications (20%): how completely the exact listing documents the attributes that matter.

Our editors also weigh how it compares with the other products in its category.

A commission is never an input to the rating. Read the full methodology.

Read the methodology →

Frequently asked questions

Is the Skouphy Enclosure with LED Light any good?

We rate it 8.0/10 (very good). It is based on 290 buyer reviews averaging 4.5/5 and the specifications stated in the listing.

Will the Skouphy Enclosure with LED Light fit my laser engraver?

Only if its stated dimensions, connectors and machine list match your exact engraver and its generation. Check the listing and your own manual; a shared brand name or a similar photo doesn't prove a fit.

What do you get with the Skouphy Enclosure with LED Light?

Its listing states 720 × 400 mm of enclosure, a 4,000 RPM exhaust fan and fire-resistant panels. These are the seller's figures; whether it fits your exact machine is worth confirming first.

What should I check before ordering the Skouphy Enclosure with LED Light?

Your exact machine: match your model and its generation against the listing and your manual; a similar photo proves nothing. The size: measure your machine's frame and the space around it with a tape, not from the product photo. Our buying guide helps. What it is for: our laser buying checklist sorts the add-ons that earn their place from the ones that gather dust.

Where can I buy the Skouphy Enclosure with LED Light?

We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.

Keep comparing

If the Skouphy Enclosure with LED Light hasn't sold you yet, see where it ranks, read the guides that feature it or browse all engraver accessories.

Read this before you buy