The 5 laser engravers we'd put on our own bench in 2026Top 5 laser engravers → See the ranking

Creality Enclosure Cover V2.0 Review

7.7Very good · out of 10Not in our top-5 rankings

The Creality Enclosure Cover V2.0 packs 720 × 400 mm of enclosure, a 4,000 RPM exhaust fan and fire-resistant panels into one laser enclosure. A good match for keeping smoke and stray light inside, with 146 buyer reviews averaging 4.5/5.

Price$45.59-5%Was $47.99Save $2.40 vs. its previous pricePrice on Nov 18, 2026 · may have changed
Specifications
BrandLutyr
CategoryEngraver accessories
Product typeEnclosure
Size (stated)720 × 400 mm
Works with (named)Creality
Buyer reviews146 · 4.5/5
ASINB0CGZWFG3M

Full listing title: Creality Laser Engraver Cover V2.0 Fireproof and Dustproof Protective Enclosure with Exhaust Fan 4000RPM Pipe for Most Laser Cutter, Insulates Against Smoke, Odor and Noise Eye Protection720x720x400mm

Listing evidence
Product type Exact Full listing title
Updated October 2026
Exact listing, ASIN B0CGZWFG3M
Rating from a published formula

Compared with similar enclosures

The two laser enclosures closest to it on our rating, with a dated price.

Creality Enclosure Cover V2.0

Creality Enclosure Cover V2.0

7.7Very good · out of 10$45.59 -5% Was $47.99Save $2.40 vs. its previous price Price on Nov 18, 2026 · may have changed
  • Stated: Enclosure
  • 146 buyer reviews
  • Engraver accessories
This product ↑
Skouphy Enclosure with LED Light

Skouphy Enclosure with LED Light

8.0Very good · out of 10$44.58 -5% Was $46.99Save $2.41 vs. its previous price Price on Nov 18, 2026 · may have changed
  • Stated: Enclosure
  • 290 buyer reviews
  • Engraver accessories
See the review ↗
Creality Laser Engraver Enclosure

Creality Laser Engraver Enclosure

7.7Very good · out of 10$48.99 Price on Nov 18, 2026 · may have changed
  • Stated: Enclosure
  • 123 buyer reviews
  • Engraver accessories
See the review ↗

What it has going for it

What changes on your machine

720 × 400 mm. Measure your machine with its cables, air hose and any rotary attached; the enclosure needs all of that plus a little air around it.

Exhaust fan, 4,000 RPM. The fan pulls the smoke into a duct; you still need a window or a filter at the other end.

Fire-resistant material, per the listing. A good extra layer around a hot job, not a reason to leave it running alone.

What Lutyr promises

The seller states, word for word, in the Creality Enclosure Cover V2.0 listing:

  • Fan speed increased to 4000RPM, enhance strong ventilation.
  • Such as xtool d1, d1 pro, CR-Laser Falcon,ortur, sculpfun, atomstack laser engravers.
  • Unique dual-view window design and anti-blue light PVC material protects your eyes and easy to boserve the engraving progress at any time.
  • Upgrade all metal support rods make the enclosure more stable and firm.

These are the seller's own words and figures.

Creality Enclosure Cover V2.0, view 3

Size and what it fits

What the Creality Enclosure Cover V2.0 listing names:

  • 720 × 400 mm
  • Exhaust fan
  • Fire-resistant material
  • Names Creality

Match your machine's exact model and generation against the listing before you order.

Creality Enclosure Cover V2.0, view 4

Price and availability

$45.59 -5% Was $47.99Save $2.40 vs. its previous price Price on Nov 18, 2026 · may have changed

The button opens the exact listing (ASIN B0CGZWFG3M), where today's price, stock and seller apply.

Creality Enclosure Cover V2.0, view 5

Our take

The verdict

On the Creality Enclosure Cover V2.0, 720 × 400 mm of enclosure is what caught our eye, and a 4,000 RPM exhaust fan doesn't hurt either. 146 buyers give it 4.5/5, which is a solid sign. The catch with this Lutyr laser enclosure: it only fits the machines it lists, so check yours before you order. Before you decide, put it next to the Skouphy Enclosure with LED Light.

Living with it

Setup

Assemble it around the machine, route the cables and the exhaust hose, and make sure the lid closes on everything.

In use

Lid closed while the laser runs, exhaust on, and a look through the window rather than lifting the cover.

What buyers say

Buyers give it 4.5/5, a strong record, above our ranked picks' 4.3 average. 146 reviews is a fair sample, enough for the average to mean something.

The numbers
Buyer rating
4.5/5
Reviews
146
Ranked picks' average
4.3/5

The one thing we'd check first

One thing to settle before the Creality Enclosure Cover V2.0 ships: check the size, because 720 × 400 mm has to fit your machine with its cables, air hose and any rotary attached.

Before you buy

Your exact machine

The listing names Creality. Match your model and its generation against the listing and your manual; a similar photo proves nothing.

The size

Measure your machine's frame and the space around it with a tape, not from the product photo. Our buying guide helps.

What it is for

Our laser buying checklist sorts the add-ons that earn their place from the ones that gather dust.

How it compares

How the Creality Enclosure Cover V2.0 stacks up against the closest alternative, the Skouphy Enclosure with LED Light.

CriterionCreality Enclosure Cover V2.0Skouphy Enclosure with LED Light
Our rating7.7/108.0/10
Size720 × 400 mm720 × 400 mm
Exhaust fanStatedStated
Fire-resistantStatedStated
Buyer reviews146 · 4.5/5290 · 4.5/5

Pick the Skouphy Enclosure with LED Light if you want our higher-rated option (8.0/10).

The score in detail

How we rated it

Our score: 7.7/10

Buyer rating (45%)

40.5 / 45

4.5/5 average

Review volume (35%)

20.5 / 35

146 buyer reviews

Documented specifications (20%)

16.2 / 20

81/100 listing documentation score

Our rating is an evidence index on a 0–10 scale, separate from the buyer star rating.

  • Buyer rating (45%): the captured average for this exact listing, damped when there are fewer than 50 reviews.
  • Review volume (35%): more reviews mean more reliable evidence, on a logarithmic scale up to 5,000 reviews.
  • Documented specifications (20%): how completely the exact listing documents the attributes that matter.

Our editors also weigh how it compares with the other products in its category.

A commission is never an input to the rating. Read the full methodology.

Read the methodology →

Frequently asked questions

Is the Creality Enclosure Cover V2.0 any good?

We rate it 7.7/10 (very good). It is based on 146 buyer reviews averaging 4.5/5 and the specifications stated in the listing.

Will the Creality Enclosure Cover V2.0 fit my laser engraver?

Only if its stated dimensions, connectors and machine list match your exact engraver and its generation. Check the listing and your own manual; a shared brand name or a similar photo doesn't prove a fit.

What do you get with the Creality Enclosure Cover V2.0?

Its listing states 720 × 400 mm of enclosure, a 4,000 RPM exhaust fan and fire-resistant panels. These are the seller's figures; whether it fits your exact machine is worth confirming first.

What should I check before ordering the Creality Enclosure Cover V2.0?

Your exact machine: the listing names Creality. Match your model and its generation against the listing and your manual; a similar photo proves nothing. The size: measure your machine's frame and the space around it with a tape, not from the product photo. Our buying guide helps. What it is for: our laser buying checklist sorts the add-ons that earn their place from the ones that gather dust.

Where can I buy the Creality Enclosure Cover V2.0?

We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.

Keep comparing

If the Creality Enclosure Cover V2.0 hasn't sold you yet, see where it ranks, read the guides that feature it or browse all engraver accessories.

Read this before you buy