The 5 laser engravers we'd put on our own bench in 2026Top 5 laser engravers → See the ranking

xTool S1 40W with IR Module & AP2 Review

The xTool S1 40W with IR Module & AP2 ticks most of the boxes we care about: 40 W of stated laser output, a 23.93 × 15.16 in work area and Class 1 safety under a closed lid. It makes most sense for makers who want two lasers in one machine; we rate it 7.3/10 from its listing.

Specifications
BrandxTool
CategoryLaser engravers
Laser typeInfrared
Laser output (lowest stated)40 W
Stated speedUp to 600 mm/s
Auto-focusStated in the listing
Safety featuresClass 1, flame detection, emergency stop
Cutting claimUp to 18 mm of wood, per the seller
RotaryIncluded, per the title
Materials namedWood, metal
ASINB0FCLCT4W1

Full listing title: xTool S1 40W Rotary Bundle- with 1064nm Infrared Laser Module and SafetyPro AP2 Smoke Purifier

Listing evidence
Laser type Exact Full listing title
Laser output (lowest stated)40,000mW Exact listing
Updated October 2026
Exact listing, ASIN B0FCLCT4W1
Rating from a published formula

Compared with similar laser engravers

The two laser engravers closest to it on our rating, with a dated price where we have one.

Compare side by side ↗

SCULPFUN S70 MAX 70W

SCULPFUN S70 MAX 70W

7.3Good · out of 10$2,199 Price on Nov 18, 2026 · may have changed
  • Stated: Diode · 70 W laser
  • Laser engravers
See the review ↗
WECREAT 20W Enclosed 4-in-1

WECREAT 20W Enclosed 4-in-1

7.3Good · out of 10$1,290 Price on Nov 18, 2026 · may have changed
  • Stated: Diode · 20 W laser
  • 99 buyer reviews
  • Laser engravers
See the review ↗

Laser output, per the listing

The lowest laser wattage the listing states, which is the one we compare. It comes with a infrared source and a 23.93 × 15.16 in work area. How deep it goes on your material is for a settings grid to tell.

What it has going for it

What changes at your bench

40 W of laser output, per the listing. Enough to cut wood and acrylic, not only mark them, in fewer passes. We read the lowest laser wattage the listing states, so this is the number to compare.

23.93 × 15.16 in work area. Room for cutting boards, signs and a whole batch of coasters in one go. Our buying guide plans the bench around it.

Class 1 enclosure, per the listing. The beam stays under the cover in normal use and the smoke leaves through one port, which is what makes a laser livable in a spare room. That port still needs a window or a filter. Our safety and enclosures guide covers the rest.

Spare room or garage?

For a spare room or a study, the Class 1 rating in the listing means the beam stays under the cover in normal use.

For a garage or a workshop, 40 W of stated output is cutting power, and cutting makes more smoke than engraving. A 23.93 × 15.16 in work area wants a big, sturdy bench.

On balance it is happiest in a garage or a workshop, lid closed and the exhaust going outside.

Great for you if…

  • You want to cut, not only engrave
  • You make signs and cutting boards, not just keychains
  • Kids or pets share the house with the laser

Skip it if…

  • You'd rather wait for buyer reviews: none are captured for this listing yet
  • You want to place designs on screen: the listing names no camera
  • You plan to cut a lot of wood: the listing names no air assist

What xTool promises

The seller states, word for word, in the xTool S1 40W with IR Module & AP2 listing:

  • With a powerful 40W (40,000mW) laser, this advanced laser cutter and engraver machine slices through 18mm cherry wood as easily as butter in a single pass.
  • Achieve next-level precision on your precious items with the xTool S1 laser engraver, thanks to xTool’s patented Pin-point Positioning technology.
  • Plus, there are over 1,000 step-by-step project tutorials to guide you.
  • The protective cover filters 99% of laser light, safeguarding your eyes without the need for goggles.

These are the seller's own words and figures.

xTool S1 40W with IR Module & AP2, view 3

Work area, power and what's in the box

What the xTool S1 40W with IR Module & AP2 listing names:

  • Infrared laser
  • 40 W of stated laser output
  • 23.93 × 15.16 in work area
  • Up to 600 mm/s, stated
  • Class 1 enclosure
  • Auto-focus
  • Rotary included
  • Arrives mostly assembled

Plan the bench and the exhaust route before the box arrives.

xTool S1 40W with IR Module & AP2, view 4

Price and availability

See current price ↗

We have no recent price on file for this listing, so we don't print an old one.

The button opens the exact listing (ASIN B0FCLCT4W1), where today's price, stock and seller apply.

xTool S1 40W with IR Module & AP2, view 5

Our take

The verdict

On the xTool S1 40W with IR Module & AP2, 40 W of stated laser output is what caught our eye, and a 23.93 × 15.16 in work area doesn't hurt either. No buyer reviews yet, so this xTool laser engraver has to win you over on paper. Where it falls short: the listing says nothing about air assist, and at 40 W you'll want it for clean cuts in wood, so budget for a kit. We'd pick the xTool if you want to cut, not only engrave; otherwise, put it next to the SCULPFUN S70 MAX 70W first.

Living with it

Delivery day

Mostly ready out of the box, per the listing. Unpack it, level it, connect the software and give it a spot near a window or the exhaust.

The first project

Run a settings grid on scrap wood before the first real gift. Our settings grid guide has the routine.

Day to day

Lid closed, extraction running, and a quick wipe of the lens every few jobs. Our focus and alignment guide has the rest.

Tumbler season

The rotary in the box takes care of the tumbler and glass orders without a second purchase; check its diameter range first.

The one thing we'd check first

Before you add the xTool S1 40W with IR Module & AP2 to your cart: check the work area, because 23.93 × 15.16 in has to fit the biggest piece you plan to make, with room for clamps or a rotary.

Before you buy

What you will make

Cut a piece of cardboard to 23.93 × 15.16 in, put your biggest project on it, and see what sticks out. Our buying guide has the layout.

Smoke and air

The cover keeps the smoke in the box, but it still has to go somewhere, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check.

Eyes and fire

Class 1, per the listing, so the beam stays under the cover in normal use. Keep the lid closed, a fire-safe surface underneath, and someone in the room while it runs.

Software

Check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

How it compares

How the xTool S1 40W with IR Module & AP2 stacks up against the closest alternative, the SCULPFUN S70 MAX 70W.

CriterionxTool S1 40W with IR Module & AP2SCULPFUN S70 MAX 70W
Our rating7.3/107.3/10
Laser typeInfraredDiode
Laser output40 W stated70 W stated
Work area23.93 × 15.16 in32.7 × 31.5 in

Both score 7.3/10. The SCULPFUN S70 MAX 70W adds more stated laser output (70 W) and a bigger work area (32.7 × 31.5 in).

The score in detail

How we rated it

Spec-based rating on a 4.5–8.5 scale: 4.5 + average of the 4 criteria × 0.4. Capped at 8.5 because no customer evidence is included.

Key specifications

9 / 10

Build, warranty & certifications

5 / 10

Listing documentation

7 / 10

Fit & compatibility

7 / 10

This product has no captured buyer-review record yet, so its rating comes from the documented listing alone: four criteria scored out of 10 (key specifications; build, warranty and certifications; listing documentation; fit and compatibility), placed on a 4.5–8.5 scale. Read the full methodology.

Read the methodology →

Frequently asked questions

Is the xTool S1 40W with IR Module & AP2 any good?

We rate it 7.3/10 (good). The rating comes from its documented listing alone, as no customer-review record is captured yet.

What laser output and work area does the xTool S1 40W with IR Module & AP2 state?

Its listing states a infrared source, 40 W as its lowest stated laser wattage and a 23.93 × 15.16 in work area. Those are the seller's figures, and a big wattage in a title often describes the power supply or the module rather than the light that reaches your material.

What else do I need with the xTool S1 40W with IR Module & AP2?

Check the exact listing and the manual for what ships in the box: smoke extraction or a filter unit, a work surface such as a honeycomb bed, and the software. Never laser PVC, vinyl or unknown plastics, and never leave the machine running on its own. Our laser buying checklist lists the checks.

What do you get with the xTool S1 40W with IR Module & AP2?

Its listing states 40 W of stated laser output, a 23.93 × 15.16 in work area, a Class 1 enclosed body, a rotary in the box, auto-focus and an infrared laser for metal. These are the seller's figures; how fine the detail comes out on your material and how loud the fans are in your room can't be read from a listing.

What should I check before ordering the xTool S1 40W with IR Module & AP2?

What you will make: cut a piece of cardboard to 23.93 × 15.16 in, put your biggest project on it, and see what sticks out. Our buying guide has the layout. Smoke and air: the cover keeps the smoke in the box, but it still has to go somewhere, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check. Eyes and fire: Class 1, per the listing, so the beam stays under the cover in normal use. Keep the lid closed, a fire-safe surface underneath, and someone in the room while it runs. Software: check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

Where can I buy the xTool S1 40W with IR Module & AP2?

We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.

Keep comparing

If the xTool S1 40W with IR Module & AP2 hasn't sold you yet, see where it ranks, read the guides that feature it or browse all laser engravers.

Read this before you buy