The 5 laser engravers we'd put on our own bench in 2026Top 5 laser engravers → See the ranking

xTool F2 Ultra 60W MOPA + 40W Diode Review

20 W of stated laser output, a 60 W MOPA source and a 48 MP camera: the xTool F2 Ultra 60W MOPA + 40W Diode covers what matters most in a fiber laser engraver. Our top-rated choice for fiber laser engravers for metal marking, made for tool tags, knife blades and anodized parts.

Variants of this model

Each variant has its own page.

Price$4,799-26%List price $6,499Save $1,700 vs. list pricePrice on Nov 18, 2026 · may have changed
Compare side by side ↗
Specifications
BrandxTool
CategoryLaser engravers
Laser typeMOPA fiber + Diode
Laser output (lowest stated)20 W
Fiber source (title)60 W MOPA
Stated speedUp to 15,000 mm/s
Stated precision0.2 mm
Camera48 MP, per the listing
Cutting claimUp to 20 mm of wood, per the seller
Materials namedWood, leather, acrylic, glass, metal, fabric
Buyer reviews44 · 4.2/5
ASINB0FHWVMX2L

Full listing title: xTool F2 Ultra 60W MOPA & 40W Diode Dual Laser Engraver

Listing evidence
Laser type Exact Full listing title
Laser output (lowest stated)20W Exact listing
Updated October 2026
Exact listing, ASIN B0FHWVMX2L
Rating from a published formula

Compared with similar fiber lasers

The two picks next to it in our fiber laser engravers for metal marking ranking, with their rating and a dated price.

Compare side by side ↗

xTool F2 Ultra 60W MOPA + 40W Diode

xTool F2 Ultra 60W MOPA + 40W Diode

9.1Excellent · out of 10$4,799 -26% List price $6,499Save $1,700 vs. list price Price on Nov 18, 2026 · may have changed
  • Stated: MOPA fiber + Diode · 20 W laser
  • 44 buyer reviews
  • Laser engravers
This product ↑
xTool F1 Ultra 20W

xTool F1 Ultra 20W

6.6Good · out of 10$2,299 -21% List price $2,919Save $620 vs. list price Price on Nov 18, 2026 · may have changed
  • Stated: Fiber + Diode · 20 W laser · 220 × 220 mm
  • 139 buyer reviews
  • Laser engravers
See the review ↗
GWEIKE G2 Pro 30W Fiber

GWEIKE G2 Pro 30W Fiber

5.7Fair · out of 10$1,599 Price on Nov 18, 2026 · may have changed
  • Stated: Fiber · 30 W laser · 110 × 110 mm
  • 43 buyer reviews
  • Laser engravers
See the review ↗

Fiber source, per the title

A MOPA source, which listings use for color marks on stainless. Fiber light is what bare steel, brass and anodized aluminum answer to. Deep marks still come from settings you find on scrap.

Why it made our list

What changes when you mark metal

20 W of laser output, per the listing. Enough to cut wood and acrylic, not only mark them, in fewer passes. The title says 60 W; we compare the 20 W of laser output the listing states, and so should you.

60 W MOPA fiber source, per the title. Fiber light is what bare steel, brass and anodized aluminum answer to: serial numbers, logos, tool marks. A MOPA source also lets you tune the pulse, which is how listings get color marks on stainless. Our diode vs CO2 vs fiber guide explains the difference.

48 MP camera. You see the bed on screen and drop the design where the piece actually sits, which saves blanks on odd shapes and second-hand finds.

Spare room or garage?

For a spare room or a study, the camera lets you place designs on screen without leaning over the machine.

For a garage or a workshop, an open frame belongs where smoke and stray light bother nobody. 20 W of stated output is cutting power, and cutting makes more smoke than engraving. Metal marking is a workshop job, and a fiber source needs glasses rated for its wavelength.

On balance it is happiest in a garage or a workshop, glasses on and the exhaust going outside.

Great for you if…

  • You want our #1 fiber laser engraver for metal marking
  • You want to cut, not only engrave
  • You mark metal more often than wood

Skip it if…

  • You want the work area spelled out: the listing we read gives no work area in millimetres
  • You mostly engrave wood and leather: a diode does that for less money
  • You want a long review record: only 44 buyer reviews so far

What xTool promises

The seller states, word for word, in the xTool F2 Ultra 60W MOPA + 40W Diode listing:

  • It delivers vibrant color engraving, precise 3D deep engraving, and cuts up to 2 mm metal, 20 mm acrylic, and 23 mm wood—one machine that does it all.
  • The 60W MOPA fiber laser engraver handles diverse metal tasks—3D embossing, deep engraving, color engraving, and cutting 2mm metal—even combined processes.
  • This 60W MOPA laser engraving machine delivers over 100 vibrant and consistent colors on metals, thanks to its precisely calibrated structure and premium optical system.
  • xTool F2 Ultra is a Class 4 laser engraver, the fiber laser output power being 60,000mW,the diode laser output power being 40,000mW.

These are the seller's own words and figures.

xTool F2 Ultra 60W MOPA + 40W Diode, view 3

Work area, power and what's in the box

What the xTool F2 Ultra 60W MOPA + 40W Diode listing names:

  • MOPA fiber + Diode laser
  • 20 W of stated laser output (60 W in the title)
  • 60 W MOPA source
  • Up to 15,000 mm/s, stated
  • Camera

Plan the bench, the exhaust route and the glasses before the box arrives.

xTool F2 Ultra 60W MOPA + 40W Diode, view 4

Price and cost per watt of laser output

$4,799 -26% List price $6,499Save $1,700 vs. list price Price on Nov 18, 2026 · may have changed

At the price on Nov 18, 2026, each stated watt of laser output costs about $80. That puts it around the middle of the 16 fiber lasers we have a price for.

Only a rough yardstick: the work area, the enclosure, the size and what comes in the box count as much.

The button opens the exact listing (ASIN B0FHWVMX2L), where today's price, stock and seller apply. Sizes and bundles of the same family often sit at different prices.

xTool F2 Ultra 60W MOPA + 40W Diode, view 5

Our take

The verdict

We like the xTool F2 Ultra 60W MOPA + 40W Diode a lot, and not only because it tops our fiber laser engraver for metal marking list. Only 44 buyers have rated it so far (4.2/5), so treat the score as an early read. Where it falls short: no stated work area, while most picks here give one. Bench measured, exhaust planned, and this is the one we'd order. If your numbers don't fit, the xTool F1 Ultra 20W is the next one to look at.

Living with it

Delivery day

Unpack, check the parts against the manual, then give it a spot near a window or the exhaust before you plug in.

The first project

Run a settings grid on scrap wood before the first real gift. Our settings grid guide has the routine.

Day to day

Glasses on, extraction running, and a quick wipe of the lens every few jobs. Our focus and alignment guide has the rest.

What buyers say

Buyers give it 4.2/5, a solid record, right on this ranking's 4.2 average. Only 44 reviews so far, and our formula damps averages built on fewer than 50.

The numbers
Buyer rating
4.2/5
Reviews
44
This ranking's average
4.2/5

The one thing we'd check first

One thing to settle before the xTool F2 Ultra 60W MOPA + 40W Diode ships: check the metal, because 60 W of fiber marks metal well, but deep marks and colors come from settings you find on scrap first.

Before you buy

What you will make

Lay your biggest cutting board or sign next to that number; tumblers and glasses need a rotary. Our buying guide has the bench layout.

Smoke and air

An open frame lets the smoke into the room, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check.

Eyes and fire

An open beam needs safety glasses for its exact wavelength, a fire-safe surface and someone in the room. Our safety and enclosures guide explains enclosures.

Software

Check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

How it compares

How the xTool F2 Ultra 60W MOPA + 40W Diode stacks up against the closest alternative in our ranking, the xTool F1 Ultra 20W.

CriterionxTool F2 Ultra 60W MOPA + 40W DiodexTool F1 Ultra 20W
Our rating9.1/106.6/10
Laser typeMOPA fiber + DiodeFiber + Diode
Fiber source60 W MOPA20 W
Work areaNot stated220 × 220 mm
Buyer reviews44 · 4.2/5139 · 4.1/5

On our rating, the xTool F2 Ultra 60W MOPA + 40W Diode comes out ahead (9.1 vs 6.6), and it brings a stronger fiber source (60 W) on top. Start with this one.

The score in detail

How we rated it

Our score: 9.1/10

Buyer rating (45%)

33.3 / 45

4.2/5 average, confidence-damped (44 reviews < 50)

Review volume (35%)

15.6 / 35

44 buyer reviews

Documented specifications (20%)

17.6 / 20

88/100 listing documentation score

Our rating is an evidence index on a 0–10 scale, separate from the buyer star rating.

  • Buyer rating (45%): the captured average for this exact listing, damped when there are fewer than 50 reviews.
  • Review volume (35%): more reviews mean more reliable evidence, on a logarithmic scale up to 5,000 reviews.
  • Documented specifications (20%): how completely the exact listing documents the attributes that matter.

Our editors also weigh how it compares with the other products in its category.

A commission is never an input to the rating. Read the full methodology.

Read the methodology →

Frequently asked questions

Is the xTool F2 Ultra 60W MOPA + 40W Diode any good?

We rate it 9.1/10 (excellent), #1 of 5 in our fiber laser engraver for metal marking ranking. It is based on 44 buyer reviews averaging 4.2/5 and the specifications stated in the listing.

What laser output and work area does the xTool F2 Ultra 60W MOPA + 40W Diode state?

Its listing states a MOPA fiber + diode source and 20 W as its lowest stated laser wattage. Those are the seller's figures, and a big wattage in a title often describes the power supply or the module rather than the light that reaches your material.

What else do I need with the xTool F2 Ultra 60W MOPA + 40W Diode?

Check the exact listing and the manual for what ships in the box: safety glasses for its wavelength, smoke extraction or a filter unit, a work surface such as a honeycomb bed, and the software. Never laser PVC, vinyl or unknown plastics, and never leave the machine running on its own. Our laser buying checklist lists the checks.

What do you get with the xTool F2 Ultra 60W MOPA + 40W Diode?

Its listing states 20 W of stated laser output, a 60 W MOPA source, a 48 MP camera and up to 15,000 mm/s of stated speed. These are the seller's figures; how fine the detail comes out on your material and how loud the fans are in your room can't be read from a listing.

What should I check before ordering the xTool F2 Ultra 60W MOPA + 40W Diode?

What you will make: lay your biggest cutting board or sign next to that number; tumblers and glasses need a rotary. Our buying guide has the bench layout. Smoke and air: an open frame lets the smoke into the room, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check. Eyes and fire: an open beam needs safety glasses for its exact wavelength, a fire-safe surface and someone in the room. Our safety and enclosures guide explains enclosures. Software: check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.

Where can I buy the xTool F2 Ultra 60W MOPA + 40W Diode?

We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.

Keep comparing

If the xTool F2 Ultra 60W MOPA + 40W Diode hasn't sold you yet, see where it ranks, read the guides that feature it or browse all laser engravers.

Where it ranks

Read this before you buy