
OMTech Maker 90W CO2 with Chiller
6.9Good · out of 10$2,999.99 Price on Nov 18, 2026 · may have changed- Stated: CO2 · 90 W laser
- Laser engravers

Product images: Amazon listings
If you're after 90 W of stated laser output, the OMTech Maker 90W CO2 with Chiller delivers, with a 20 × 28 in work area and air assist on board on top. It makes most sense for a small business that cuts acrylic and wood; we rate it 6.9/10 from its listing.
| Brand | OMTech |
|---|---|
| Category | Laser engravers |
| Laser type | CO2 |
| Laser output (lowest stated) | 90 W |
| Air assist | Stated in the listing |
| Materials named | Wood, leather, acrylic, glass, metal |
| ASIN | B0C98QN12F |
Full listing title: OMTech Maker 90W CO2 Laser Engraver & Cutter with Water Chiller
| Laser type | Exact Full listing title |
|---|---|
| Laser output (lowest stated) | 90WExact listing |
The two laser engravers closest to it on our rating, with a dated price.



The lowest laser wattage the listing states, which is the one we compare. It comes with a CO2 source and a 20 × 28 in work area. How deep it goes on your material is for a settings grid to tell.
What it has going for it
90 W of laser output, per the listing. Enough to cut wood and acrylic, not only mark them, in fewer passes. We read the lowest laser wattage the listing states, so this is the number to compare.
20 × 28 in work area. Room for cutting boards, signs and a whole batch of coasters in one go. Our buying guide plans the bench around it.
Air assist. A jet of air at the nozzle blows the smoke out of the cut: cleaner edges, less charring and fewer flare-ups on wood.
For a garage or a workshop, an open frame belongs where smoke and stray light bother nobody. 90 W of stated output is cutting power, and cutting makes more smoke than engraving. A 20 × 28 in work area wants a big, sturdy bench.
On balance it is happiest in a garage or a workshop, glasses on and the exhaust going outside.
The seller states, word for word, in the OMTech Maker 90W CO2 with Chiller listing:
OMTech's 90W CO2 laser engraver engraves as deep as 0.4" on wood, glass, acrylic, leather, and more nonmetallic materials at speeds up to 23.6 ips.
The honeycomb and aluminum blade beds feature a 20"x28" work area to fit most projects.
The high-performance Yongli H2 tube delivers 90W of power for up to 8000 hours of usage and extends its lifespan when consistently used at lower settings.
The built-in air assist efficiently removes smoke and dust to protect your laser lenses and reflective mirrors.
Laser Class 2, 0.827 mW output power.
These are the seller's own words and figures.

What the OMTech Maker 90W CO2 with Chiller listing names:
Plan the bench, the exhaust route and the glasses before the box arrives.

At the price on Nov 18, 2026, each stated watt of laser output costs about $33. That puts it around the middle of the 51 laser engravers we have a price for.
Only a rough yardstick: the work area, the enclosure, the size and what comes in the box count as much.
The button opens the exact listing (ASIN B0C98QN12F), where today's price, stock and seller apply.

Our take
On the OMTech Maker 90W CO2 with Chiller, 90 W of stated laser output is what caught our eye, and a 20 × 28 in work area doesn't hurt either. No buyer reviews yet, so the OMTech Maker 90W CO2 with Chiller has to win you over on paper. The catch with the OMTech Maker 90W CO2 with Chiller: there's no camera in the listing, so you'll line designs up by framing the job first, not by dragging them over a photo of the bed. We'd pick the OMTech Maker 90W CO2 with Chiller if you want to cut, not only engrave; otherwise, put it next to the Creality Falcon 10W first.
Unpack, check the parts against the manual, then give it a spot near a window or the exhaust before you plug in.
Run a settings grid on scrap wood before the first real gift. Our settings grid guide has the routine.
Air on for cuts, glasses on, extraction running, and a quick wipe of the lens every few jobs. Our focus and alignment guide has the rest.
20 × 28 in fits a row of coasters or a full sign in one go, which is where a bigger bed earns its keep.
Before you add the OMTech Maker 90W CO2 with Chiller to your cart: check the work area, because 20 × 28 in has to fit the biggest piece you plan to make, with room for clamps or a rotary.
Cut a piece of cardboard to 20 × 28 in, put your biggest project on it, and see what sticks out. Our buying guide has the layout.
An open frame lets the smoke into the room, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check.
An open beam needs safety glasses for its exact wavelength, a fire-safe surface and someone in the room. Our safety and enclosures guide explains enclosures.
Check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.
How the OMTech Maker 90W CO2 with Chiller stacks up against the closest alternative, the Creality Falcon 10W.
| Criterion | OMTech Maker 90W CO2 with Chiller | Creality Falcon 10W |
|---|---|---|
| Our rating | 6.9/10 | 6.9/10 |
| Laser type | CO2 | Not stated |
| Laser output | 90 W stated | 10 W stated |
| Work area | 20 × 28 in | 400 × 415 mm |
| Buyer reviews | None captured | 181 · 4.2/5 |
Both score 6.9/10. The OMTech Maker 90W CO2 with Chiller brings more stated laser output (90 W) and a bigger work area (20 × 28 in), so it has the edge on paper.
We rate it 6.9/10 (good). The rating comes from its documented listing alone, as no customer-review record is captured yet.
Its listing states a CO2 source, 90 W as its lowest stated laser wattage and a 20 × 28 in work area. Those are the seller's figures, and a big wattage in a title often describes the power supply or the module rather than the light that reaches your material.
Check the exact listing and the manual for what ships in the box: safety glasses for its wavelength, smoke extraction or a filter unit, a work surface such as a honeycomb bed, and the software. Never laser PVC, vinyl or unknown plastics, and never leave the machine running on its own. Our laser buying checklist lists the checks.
Its listing states 90 W of stated laser output, a 20 × 28 in work area and built-in air assist. These are the seller's figures; how fine the detail comes out on your material and how loud the fans are in your room can't be read from a listing.
What you will make: cut a piece of cardboard to 20 × 28 in, put your biggest project on it, and see what sticks out. Our buying guide has the layout. Smoke and air: an open frame lets the smoke into the room, so plan a route to a window or a filter unit before the first job. Our ventilation and materials guide covers what to check. Eyes and fire: an open beam needs safety glasses for its exact wavelength, a fire-safe surface and someone in the room. Our safety and enclosures guide explains enclosures. Software: check which software the maker supports on your computer before the box arrives, and plan an evening for the first settings grid. Our software workflow guide walks through a job.
We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.
If the OMTech Maker 90W CO2 with Chiller hasn't sold you yet, see where it ranks, read the guides that feature it or browse all laser engravers.