
Cloudray Honeycomb Bed with 4 Clamps
4.6Fair · out of 10$52.99 Price on Nov 18, 2026 · may have changed- Stated: Honeycomb bed
- 21 buyer reviews
- Engraver accessories

Product images: Amazon listings
On paper, the Cloudray Honeycomb Bed with 4 Clamps gets the important things right: a 400 × 400 mm bed, an aluminum base plate and 4 positioning clamps. Rated 4.6/10, it suits clean cuts without scorched undersides.
| Brand | Cloudray |
|---|---|
| Category | Engraver accessories |
| Product type | Honeycomb bed |
| Size (stated) | 400 × 400 mm |
| Aluminum plate | Included, per the listing |
| Clamps | 4 |
| Buyer reviews | 21 · 4.5/5 |
| ASIN | B0GCHQVNLN |
Full listing title: Cloudray 400x400mm Honeycomb Laser Bed with 4 Positioning Fixture Clamps,Black
| Product type | Exact Full listing title |
|---|
The two honeycomb beds closest to it on our rating, with a dated price.



The bed has to sit inside your machine's frame, with the head still able to focus on top.
What it has going for it
400 × 400 mm. The bed has to sit inside your machine's frame with the head still able to focus on the top. Measure the frame, not the work area.
Aluminum base plate. The plate under the honeycomb takes the beam on through-cuts instead of your table.
4 positioning clamps. Clamps hold warped sheets flat, which keeps the focus right across the whole piece.
The seller states, word for word, in the Cloudray Honeycomb Bed with 4 Clamps listing:
The honeycomb laser bed for CO2 laser cutter machine or CNC machine measures the size of 400x400mm.
The honeycomb bed for cnc accessories comes with set of 4 aluminum plates.
This honeycomb laser bed comes with four positioning fixtures.
Brush away debris from honeycomb after each use.
These are the seller's own words and figures.

What the Cloudray Honeycomb Bed with 4 Clamps listing names:
Match your machine's exact model and generation against the listing before you order.

The button opens the exact listing (ASIN B0GCHQVNLN), where today's price, stock and seller apply.

Our take
The Cloudray Honeycomb Bed with 4 Clamps earns its place with a 400 × 400 mm bed and an aluminum base plate. Only 21 buyers have rated it so far (4.5/5), so treat the score as an early read. The catch with this Cloudray honeycomb bed: it only fits the machines it lists, so check yours before you order. We'd pick it if you cut through, not just engrave; otherwise, put it next to the Mroy mio Honeycomb Bed (400 x 400 mm) first.
Drop it under the head, refocus on the top of the bed and keep the frame square.
Through-cuts leave less scorch on the back, and small parts stay put instead of falling into the gap.
Buyers give it 4.5/5, a strong record, above our ranked picks' 4.3 average. Only 21 reviews so far, and our formula damps averages built on fewer than 50.
Before you add the Cloudray Honeycomb Bed with 4 Clamps to your cart: check the size, because 400 × 400 mm has to sit inside your machine's frame with the head still able to focus on top.
Match your model and its generation against the listing and your manual; a similar photo proves nothing.
Measure your machine's frame and the space around it with a tape, not from the product photo. Our buying guide helps.
Our laser buying checklist sorts the add-ons that earn their place from the ones that gather dust.
How the Cloudray Honeycomb Bed with 4 Clamps stacks up against the closest alternative, the Mroy mio Honeycomb Bed (400 x 400 mm).
| Criterion | Cloudray Honeycomb Bed with 4 Clamps | Mroy mio Honeycomb Bed, 400 x 400 mm |
|---|---|---|
| Our rating | 4.6/10 | 5.5/10 |
| Size | 400 × 400 mm | 400 × 400 mm |
| Aluminum plate | Stated | Stated |
| Clamps | 4 | Not stated |
| Buyer reviews | 21 · 4.5/5 | 28 · 4.9/5 |
Pick the Mroy mio Honeycomb Bed (400 x 400 mm) if you want our higher-rated option (5.5/10), with a higher buyer rating (4.9/5).
We rate it 4.6/10 (fair). It is based on 21 buyer reviews averaging 4.5/5 and the specifications stated in the listing.
Only if its stated dimensions, connectors and machine list match your exact engraver and its generation. Check the listing and your own manual; a shared brand name or a similar photo doesn't prove a fit.
Its listing states a 400 × 400 mm bed, an aluminum base plate and 4 positioning clamps. These are the seller's figures; whether it fits your exact machine is worth confirming first.
Your exact machine: match your model and its generation against the listing and your manual; a similar photo proves nothing. The size: measure your machine's frame and the space around it with a tape, not from the product photo. Our buying guide helps. What it is for: our laser buying checklist sorts the add-ons that earn their place from the ones that gather dust.
We link to the exact listing on Amazon, where today's price, stock and seller apply. It is an affiliate link, and it has no effect on the rating.
If the Cloudray Honeycomb Bed with 4 Clamps hasn't sold you yet, see where it ranks, read the guides that feature it or browse all engraver accessories.